DIN 1.2379 Rod, Check D2 Steel Flat Bar Sizes

D2 Tool Steel Round Bar

DIN 1.2379 Rod

D2 Steel Flat Bar
D2 is a tool grade steel, with good resistance in aqueous media like water. This is because of the chromium present in the alloy. The chemical makeup of chromium in the D2 Tool Steel Round Bar rounds about 12% of the total weight, with the inclusion of 1.5% carbon. Thus, this material could be classified as a high carbon alloy. It is possible to harden the tool by using air hardening. Heat treatment of the UNS T30402 D2 Round Bar will yield a harder material where the property would range between a value of 55 HRC - 62 HRC. Due to its high hardness properties, the surface remains resistant to both wear as well as abrasion. However, the wear and abrasion resistance properties of the DIN 1.2379 D2 steel Rod could also be attributed to the formation of chromium carbide which prevents friction. In an annealed condition, it is possible to machine the D2 Steel Flat Bar . Being an economical alloy, coupled with high hardness and moderate resistance to corrosion amongst other properties is what makes the D2 Flat Bar a steel alloy that is popular in industries that make tools like rolls, punches, dies, knives, or food equipment.
Check Global sales network For Hchcr D2 Round Bar in Mumbai, View available sizes of UNS T30402 Square and D2 steel bar.
Specification of D2 Tool Steel Round Bar
- Standard : ISI,ASTM,BS,DIN,GB,JIS,AISI,JIS,DIN,GB
- Material Grade : AISI O1 (DIN-1.2510) (IS-T90Mn6WCr2) Tool Steel Round Bar
- Diameter : : 10 mm ~ 900 mm
- Type : Flats, Round, Square, Forged.
Different types of D2 Steel Flat Bar

D2 Forged ESR 810mm 1000mm Size Tool Steel Round Bar

AISI D2 Round Forged Rolled Tool Steel

D2 Alloy Round Steel Bars 1.2379

D2 Tool Steel Rod

Die steel round bar D2,1.2379

DIN1.2379 D2 SKD11 Hot Rolled Forged Cold Work Mould Steel bar

Cold Work Steel Aisi D2 Steel Round Bar

SKD11 / 1.2379 tool steel D2 round bar

D2 Hex Bar
Check Equivalent Properties of IS-T90MN6WCR2 D2 Round Bar, D2 Tool Steel Distributors, View SGS Test 2B surface AISI 01 Die Steel Bright Bar Manufacturer India
Equivalent of D2 Flat Bar
- DIN 1.2379
- NI KU
- B.S. BD 2
- ASTM A681
- FED QQ-T-570
- SAE J437
- SAE J438
- UNS T30402
Physical Properties of UNS T30402 D2 Round Bar
Properties | Metric | Imperial |
---|---|---|
Density | 7.7 x 1000 kg/m3 | 0.278 lb/in3 |
Heat Treatment of D2 steel bar
Soft annealing °C | Cooling | Hardness HB |
---|---|---|
840 – 870 | Furnace | max. 250 |
Stress-relief annealing °C | Cooling |
---|---|
approx. 660-710 | Furnace |
Hardening °C | Quenching | Hardness after quenching HRC |
---|---|---|
1000-1050 | Air, oil or saltbath, 500-550 °C | 63 |
Tempering °C after quenching | 100 | 200 | 300 | 400 | 500 | 525 | 550 | 600 |
HRC | 64 | 61.5 | 58.5 | 58.5 | 59 | 60 | 57 | 50 |
Thermal Properties of DIN 1.2379 D2 steel Rod
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Thermal expansion | 10.4 x 10-6/ºC | 20-100 | – |
Mechanical Analysis of D2 Tool Steel Round Bar
mechanical Properties | Metric | Imperial |
---|---|---|
Hardness, Knoop (converted from Rockwell C hardness) | 769 | 769 |
Hardness, Rockwell C | 62 | 62 |
Hardness, Vickers | 748 | 748 |
Izod impact unnotched | 77.0 J | 56.8 ft-lb |
Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
Elastic modulus | 190-210 GPa | 27557-30457 ksi |
Finding the best quality and reasonable Cold Rolled D2 Steel Rod in India, D2 Tool Steel Manufacturers, Check D2 Flat Stock and D2 High Carbon Steel Bar at best prices
DIN 1.2379 Rod Price
D2 Tool Steel Rod Price List | Price per ton |
D2 tool steel forged steel Round Bar/Rods | US $480.00-$580.00 / Metric Ton |
AISI d2 Forged Rod | US $1200-$1500 / Ton |
D2 mold steel round bar Die steel mould rod | US $650.00-$1000 / Ton |
D2 Steel Flat Bar Chemical Behaviour
C % | V % | Cr % | Mn % | W % |
0.95% | 0.20% | 0.50% | 1.25% | 0.50% |
We are Largest D2 Tool Steel Suppliers in India
D2 Tool Steel Bar Stock
|
|
D2 Tool Steel Suppliers in India. View NI KU D2 Flat Bars Weight Chart, SAE J437 D2 Tool Steel Welding Tig Rod, WNR 1.2379 Square Bars & D3 High Carbon Steel Bar Tolerance Chart
Hchcr D2 Round Bar Tolerance
1/2 - 1 1/2 Dia | +.010/.020" |
1 5/8 up to 3 Dia | +.015/.025" |
3 thru 6 Dia | +.062/.188" |
6 1/4 thru 7 Dia | +.093/.188" |
Over 7 Dia | +.125/.250" |
Application of IS-T90MN6WCR2 D2 Round Bar
- Stamping or Forming Dies
- Punches
- Forming Rolls
- Knives, slitters, shear blades
- Tools
- Scrap choppers
- Tyre shredders
AISI 01 Die Steel Bright Bar Forging
D2 steel can be done from 1065ºC (1950ºF) down to 954ºC (1750ºF). Do not forge below 926ºC (1700ºF).
D2 Steel Rod Density
Properties | Metric | Imperial |
Density | 7.7 x 1000 kg/m3 | 0.278 lb/in3 |
D2 Steel Hardness
Temperature [°C] | 150 | 200 | 250 | 300 | 350 | 400 |
Hardness [HRc] | 62-61 | 61-60 | 60-59 | 57-56 | 56-55 | 56-55 |
Melting Point Of D2 Tool Steel
Properties | Metric | Imperial |
---|---|---|
Melting point | 1421°C | 2590°F |
D2 High Carbon Steel Bar Condition
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
Orange Steel India is an ISO certified D2 Tool Steel Manufacturers in India & HSS Bar distributor in mumbai.
Surface Finish Of D3 High Carbon Steel Bar
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
D2 Round Bar Size Chart
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
---|---|---|---|
Cold Drawn and Ground | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
Cold Drawn and Polish | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
D2 Steel Rods Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
D2 Bar Processing
Orange Steel India is a D2 Tool Steel Distributors in India and Please drop an Email to info@orangesteelindia.com
D2 Flat Stock Range
Diameter | Diameter Tolerance | Length |
.125" | +-0.0005" | 12" |
.125" | +-0.0005" | 36" |
.125" | +-0.0005" | 72" |
.1875" | +-0.0005" | 12" |
.1875" | +-0.0005" | 36" |
.1875" | +-0.0005" | 72" |
.250" | +-0.0005" | 12" |
.250" | +-0.0005" | 36" |
.250" | +-0.0005" | 72" |
.3125" | +-0.0005" | 12" |
.3125" | +-0.0005" | 36" |
.3125" | +-0.0005" | 72" |
.375" | +-0.0005" | 12" |
.375" | +-0.0005" | 36" |
.375" | +-0.0005" | 72" |
.4375" | +-0.0005" | 12" |
.4375" | +-0.0005" | 36" |
.4375" | +-0.0005" | 72" |
.500" | +-0.001" | 12" |
.500" | +-0.001" | 36" |
.500" | +-0.001" | 72" |
.625" | +-0.001" | 36" |
.625" | +-0.001" | 12" |
.625" | +-0.001" | 72" |
.750" | +-0.001" | 12" |
.750" | +-0.001" | 36" |
.750" | +-0.001" | 72" |
.875" | +-0.001" | 36" |
.875" | +-0.001" | 12" |
.875" | +-0.001" | 72" |
1.00" | +-0.001" | 12" |
1.00" | +-0.001" | 36" |
1.00" | +-0.001" | 72" |
1.25" | +-0.001" | 12" |
1.25" | +-0.001" | 36" |
1.25" | +-0.001" | 72" |
1.50" | +-0.001" | 12" |
1.50" | +-0.001" | 36" |
1.50" | +-0.001" | 72" |
1.75" | +-0.001" | 12" |
1.75" | +-0.001" | 36" |
1.75" | +-0.001" | 72" |
2.00" | +-0.001" | 12" |
2.00" | +-0.001" | 36" |
2.00" | +-0.001" | 72" |
Characteristics Of D2 Material Round Bar
Ni Ku D2 Flat Bars Tolerance
Hot Rolled round bar | |||
Diameter (milimeter) |
Diameter Tolerance (milimeter) |
Diameter (milimeter) |
Diameter Tolerance (milimeter) |
6.4~15.8 | -0.038 ~0.038 | 181~<206.2 | 0~1.6 |
15.8~<77.6 | 0~0.10 | 206.2~<257 | 0~2.4 |
77.6~<103 | 0~0.15 | 257~<307.7 | 0~3.2 |
103~<181 | 0~0.78 | ≥307.7 | 0~4.7 |
D2 Tool Steel Round Bar Quenching
Quenching, 820 + 15 ℃ preheat, 820 + 6 ℃ (salt bath) or 1010 + 6 ℃ furnace atmosphere heating, heat preservation 10 ~ 20 min, air cooling,
ASE J437 D2 Tool Steel Welding Tig Rod Stress Relief Annealing
Temperature | Cooling |
600 – 650oC | furnace |
Weight Of D2 Tool Steel Flat Bar
Diameter in Inches | Diameter (in/mm) | Weight Chart | Weight per 12' Length |
3/32 inches | 0.0938 inches 2.38252 mm | 0.0247 lbs/ft 0.03675854 kg/m | 0.297 lbs 0.1346895 kg |
1/8 inches | 0.125 inches 3.175 mm | 0.0439 lbs/ft 0.06533198 kg/m | 0.527 lbs 0.2389945 kg |
3/16 inches | 0.1875 inches 4.7625 mm | 0.0987 lbs/ft 0.14688534 kg/m | 1.185 lbs 0.5373975 kg |
1/4 inches | 0.25 inches 6.35 mm | 0.1755 lbs/ft 0.2611791 kg/m | 2.106 lbs 0.955071 kg |
7/16 inches | 0.4375 inches 11.1125 mm | 0.5376 lbs/ft 0.80005632 kg/m | 6.451 lbs 2.9255285 kg |
15/32 inches | 0.4688 inches 11.90752 mm | 0.6173 lbs/ft 0.91866586 kg/m | 7.407 lbs 3.3590745 kg |
17/32 inches | 0.5313 inches 13.49502 mm | 0.7928 lbs/ft 1.17984496 kg/m | 9.514 lbs 4.314599 kg |
9/16 inches | 0.5625 inches 14.2875 mm | 0.8887 lbs/ft 1.32256334 kg/m | 10.664 lbs 4.836124 kg |
5/8 inches | 0.625 inches 15.875 mm | 1.0971 lbs/ft 1.63270422 kg/m | 13.165 lbs 5.9703275 kg |
3/4 inches | 0.75 inches 19.05 mm | 1.5798 lbs/ft 2.35105836 kg/m | 18.958 lbs 8.597453 kg |
13/16 inches | 0.8125 inches 20.6375 mm | 1.8541 lbs/ft 2.75927162 kg/m | 22.249 lbs 10.0899215 kg |
7/8 inches | 0.875 inches 22.225 mm | 2.1503 lbs/ft 3.20007646 kg/m | 25.804 lbs 11.702114 kg |
15/16 inches | 0.9375 inches 23.8125 mm | 2.4685 lbs/ft 3.6736217 kg/m | 29.622 lbs 13.433577 kg |
1 inches | 1 inches 25.4 mm | 2.8086 lbs/ft 4.17975852 kg/m | 33.703 lbs 15.2843105 kg |
1 1/16 inches | 1.0625 inches 26.9875 mm | 3.1706 lbs/ft 4.71848692 kg/m | 38.048 lbs 17.254768 kg |
1 1/8 inches | 1.125 inches 28.575 mm | 3.5546 lbs/ft 5.28995572 kg/m | 42.655 lbs 19.3440425 kg |
1 3/16 inches | 1.1875 inches 30.1625 mm | 3.9606 lbs/ft 5.89416492 kg/m | 47.527 lbs 21.5534945 kg |
1 1/4 inches | 1.25 inches 31.75 mm | 4.3884 lbs/ft 6.53081688 kg/m | 52.661 lbs 23.8817635 kg |
1 5/16 inches | 1.3125 inches 33.3375 mm | 4.8382 lbs/ft 7.20020924 kg/m | 58.059 lbs 26.3297565 kg |
1 3/8 inches | 1.375 inches 34.925 mm | 5.31 lbs/ft 7.902342 kg/m | 63.720 lbs 28.89702 kg |
1 1/2 inches | 1.5 inches 38.1 mm | 6.3193 lbs/ft 9.40438226 kg/m | 75.832 lbs 34.389812 kg |
1 5/8 inches | 1.625 inches 41.275 mm | 7.4164 lbs/ft 11.03708648 kg/m | 88.997 lbs 40.3601395 kg |
1 3/4 inches | 1.75 inches 44.45 mm | 8.6013 lbs/ft 12.80045466 kg/m | 103.216 lbs 46.808456 kg |
1 7/8 inches | 1.875 inches 47.625 mm | 9.8740 lbs/ft 14.6944868 kg/m | 118.487 lbs 53.7338545 kg |
2 inches | 2 inches 50.8 mm | 11.2344 lbs/ft 16.71903408 kg/m | 134.812 lbs 61.137242 kg |
Sizes Of WNR 1.2379 Square Bars
Size Chart in Milimeter | Weight Chart per Meter (Kilogram) | Size Chart in Milimeter | Weight Chart per Meter (Kilogram) |
---|---|---|---|
12 x 12 | 1.14 | 30x30 | 7.11 |
16 x 16 | 2.02 | 40 x 40 | 12.60 |
20 x 20 | 3.16 | 50 x 50 | 19.80 |
25 x 25 | 4.94 |
D2 Hex Bar Size Chart
Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) |
---|---|---|---|---|---|
7 x 7 | 0.337 | 19 x 19 | 2.479 | 38 x 38 | 9.916 |
8 x 8 | 0.44 | 20 x 20 | 2.747 | 40 x 40 | 10.988 |
9 x 9 | 0.556 | 21 x 21 | 3.029 | 42 x 42 | 12.114 |
10 x 10 | 0.687 | 22 x 22 | 3.324 | 45 x 45 | 13.906 |
11 x 11 | 0.831 | 24 x 24 | 3.956 | 48 x 48 | 15.822 |
12 x 12 | 0.989 | 25 x 25 | 4.292 | 50 x 50 | 17.168 |
13 x 13 | 1.161 | 26 x 26 | 4.642 | 53 x 53 | 19.29 |
14 x 14 | 1.346 | 28 x 28 | 5.384 | 55 x 55 | 20.774 |
15 x 15 | 1.545 | 30 x 30 | 6.181 | 60 x 60 | 24.723 |
16 x 16 | 1.758 | 32 x 32 | 7.032 | 65 x 65 | 29.015 |
17 x 17 | 1.985 | 34 x 34 | 7.939 | 70 x 70 | 33.65 |
18 x 18 | 2.225 | 36 x 36 | 8.9 | 75 x 75 | 38.629 |
D2 Flat Bar Size In Mm
Sizes Chart in Milimeter | Sizes in Inch | Thickness Chart In MM | Thickness Chart In Inches |
---|---|---|---|
22 | 7/8 | 17 & 18 | 2/3 - 5/7 |
25 | 1 | 5 to 20 | 3/16 - 4/5 |
30 | 1-3/16 | 5 to 20 | 3/16 - 4/5 |
32 | 1-1/4 | 6 to 20 | 1/4 - 4/5 |
35 | 1-3/8 | 5 to 20 | 3/16 - 3/16 |
40 | 1-4/7 | 5 to 25 | 3/16 - 1 |
45 | 1-7/9 | 5 to 25 | 3/16 - 1 |
47 | 1-6/7 | 17,25 & 32 | 2/3, 1 & 1-1/4 |
50 | 2 | 5 to 32 | 3/16 - 1-1/4 |
55 | 2-1/16 | 5 to 25 | 3/16 - 1 |
57 | 2-1/4 | 32 | 1-1/4 |
60 | 2-3/8 | 5 to 35 | 3/16 - 1-3/8 |
63 | 2-1/2 | 10 to 30 | 3/8 - 1-3/16 |
65 | 2-5/9 | 10 to 30 & 35 | 3/8 - 1-3/16, & 1-3/8 |
70 | 2-3/4 | 6 to 25 & 40 | 1/4 - 1, & 1-4/7 |
75 | 3 | 8 to 25 | 5/16 - 1 |
80 | 3-1/8 | 8 to 20 | 5/16 - 4/5 |
90 | 3-1/2 | 8 to 20 | 5/16- 4/5 |
100 | 4 | 8, 10, 12 | 5/16, 3/8, 1/2 |
D2 Hollow Bar Sizes
Size Table in MM | Chucked true to Outside Dia in MM | Chucked true to Inside Dia in MM and Inch | |||||||
---|---|---|---|---|---|---|---|---|---|
Outside Dia, Milimeter |
Inside Dia, Milimeter |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches. |
Minimum. Inside Dia, Inches |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches |
Minimum. Inside Dia, Inches |
32 | 20 | 31 | 21.9 | 1.220 | 0.862 | 30 | 21 | 1.185 | 0.827 |
32 | 16 | 31 | 18 | 1.220 | 0.709 | 30 | 17 | 1.181 | 0.669 |
36 | 25 | 35 | 26.9 | 1.378 | 1.059 | 34.1 | 26 | 1.343 | 1.024 |
36 | 20 | 35 | 22 | 1.378 | 0.866 | 34 | 21 | 1.339 | 0.827 |
36 | 16 | 35 | 18.1 | 1.378 | 0.713 | 33.9 | 17 | 1.335 | 0.669 |
40 | 28 | 39 | 29.9 | 1.535 | 1.177 | 38.1 | 29 | 1.500 | 1.142 |
40 | 25 | 39 | 27 | 1.535 | 1.063 | 38 | 26 | 1.496 | 1.024 |
40 | 20 | 39 | 22.1 | 1.535 | 0.870 | 37.9 | 21 | 1.492 | 0.827 |
45 | 32 | 44 | 33.9 | 1.732 | 1.335 | 43.1 | 33 | 1.697 | 1.299 |
45 | 28 | 44 | 30 | 1.732 | 1.181 | 43 | 29 | 1.693 | 1.142 |
45 | 20 | 44 | 22.2 | 1.732 | 0.874 | 42.8 | 21 | 1.685 | 0.827 |
50 | 36 | 49 | 38 | 1.929 | 1.496 | 48 | 37 | 1.890 | 1.457 |
50 | 32 | 49 | 34.1 | 1.929 | 1.343 | 47.9 | 33 | 1.886 | 1.299 |
50 | 25 | 49 | 27.2 | 1.929 | 1.071 | 47.8 | 26 | 1.882 | 1.024 |
56 | 40 | 55 | 42 | 2.165 | 1.654 | 54 | 41 | 2.126 | 1.614 |
56 | 36 | 55 | 38.1 | 2.165 | 1.500 | 53.9 | 37 | 2.122 | 1.457 |
56 | 28 | 55 | 30.3 | 2.165 | 1.193 | 53.7 | 29 | 2.114 | 1.142 |
63 | 50 | 62 | 51.9 | 2.441 | 2.043 | 61.1 | 51 | 2.406 | 2.008 |
63 | 45 | 62 | 47 | 2.441 | 1.850 | 61 | 46 | 2.402 | 1.811 |
63 | 40 | 62 | 42.2 | 2.441 | 1.661 | 60.8 | 41 | 2.394 | 1.614 |
63 | 36 | 62 | 38.3 | 2.441 | 1.508 | 60.7 | 37 | 2.390 | 1.457 |
63 | 32 | 62 | 34.4 | 2.441 | 1.354 | 60.6 | 33 | 2.386 | 1.299 |
71 | 56 | 69.9 | 58 | 2.752 | 2.283 | 68.9 | 57 | 2.713 | 2.244 |
71 | 45 | 69.9 | 47.3 | 2.752 | 1.862 | 68.6 | 46 | 2.701 | 1.811 |
71 | 40 | 69.9 | 42.4 | 2.752 | 1.669 | 68.5 | 41 | 2.697 | 1.614 |
71 | 36 | 69.9 | 38.5 | 2.752 | 1.516 | 68.4 | 37 | 2.693 | 1.457 |
75 | 60 | 73.8 | 62 | 2.906 | 2.441 | 72.8 | 61 | 2.866 | 2.402 |
75 | 50 | 73.8 | 52.2 | 2.906 | 2.055 | 72.6 | 51 | 2.858 | 2.008 |
75 | 40 | 73.8 | 42.5 | 2.906 | 1.673 | 72.3 | 41 | 2.846 | 1.614 |
80 | 63 | 78.8 | 65 | 3.102 | 2.559 | 77.8 | 64 | 3.063 | 2.520 |
80 | 50 | 78.8 | 52.4 | 3.102 | 2.053 | 77.4 | 51 | 3.047 | 2.008 |
80 | 45 | 78.8 | 47.5 | 3.102 | 1.870 | 77.3 | 46 | 3.043 | 1.811 |
80 | 40 | 78.8 | 42.6 | 3.102 | 1.677 | 77.2 | 41 | 3.039 | 1.614 |
85 | 67 | 83.7 | 69.1 | 3.295 | 2.720 | 82.6 | 68 | 3.252 | 2.677 |
85 | 55 | 83.7 | 57.4 | 3.295 | 2.260 | 82.3 | 56.0 | 3.240 | 2.205 |
85 | 45 | 83.7 | 47.6 | 3.295 | 1.874 | 82.1 | 46.0 | 3.232 | 1.811 |
90 | 71 | 88.6 | 73.1 | 3.488 | 2.878 | 87.6 | 72.1 | 3.449 | 2.839 |
90 | 63 | 88.6 | 65.3 | 3.488 | 2.571 | 87.3 | 64.0 | 3.437 | 2.520 |
90 | 56 | 88.6 | 58.5 | 3.488 | 2.303 | 87.1 | 57.0 | 3.429 | 2.244 |
90 | 50 | 88.6 | 52.6 | 3.488 | 2.071 | 87.0 | 51.0 | 3.425 | 2.008 |
95 | 75 | 93.5 | 77.3 | 3.681 | 3.041 | 92.4 | 76.2 | 3.641 | 2.997 |
95 | 67 | 93.5 | 69.3 | 3.681 | 2.728 | 92.2 | 68.0 | 3.630 | 2.677 |
95 | 50 | 93.5 | 52.7 | 3.681 | 2.075 | 91.8 | 51.0 | 3.614 | 2.008 |
100 | 80 | 98.5 | 82.3 | 3.878 | 3.240 | 97.4 | 81.2 | 3.835 | 3.197 |
100 | 71 | 98.5 | 73.4 | 3.878 | 2.890 | 97.2 | 72.1 | 3.827 | 2.839 |
100 | 63 | 98.5 | 65.5 | 3.878 | 2.579 | 97.0 | 64.0 | 3.819 | 2.520 |
100 | 56 | 98.5 | 58.7 | 3.878 | 2.311 | 96.8 | 57.0 | 3.811 | 2.244 |
106 | 80 | 104.4 | 82.5 | 4.110 | 3.248 | 103.1 | 81.2 | 4.059 | 3.197 |
106 | 71 | 104.4 | 73.5 | 4.110 | 2.894 | 103.0 | 72.1 | 4.055 | 2.839 |
106 | 63 | 104.4 | 65.7 | 4.110 | 2.587 | 102.7 | 64.0 | 4.043 | 2.520 |
106 | 56 | 104.4 | 58.9 | 4.110 | 2.319 | 102.5 | 57.0 | 4.035 | 2.244 |
112 | 90 | 110.3 | 92.5 | 4.343 | 3.642 | 109.2 | 91.4 | 4.299 | 3.598 |
112 | 80 | 110.3 | 82.6 | 4.343 | 3.252 | 108.9 | 81.2 | 4.287 | 3.197 |
112 | 71 | 110.3 | 73.7 | 4.343 | 2.902 | 108.7 | 72.1 | 4.280 | 2.839 |
112 | 63 | 110.3 | 65.8 | 4.343 | 2.591 | 108.5 | 64.0 | 4.272 | 2.520 |
118 | 90 | 116.2 | 92.7 | 4.575 | 3.650 | 114.9 | 91.4 | 4.524 | 3.598 |
118 | 80 | 116.2 | 82.8 | 4.575 | 3.260 | 114.6 | 81.2 | 4.512 | 3.197 |
118 | 71 | 116.2 | 73.8 | 4.575 | 2.906 | 114.5 | 72.1 | 4.508 | 2.839 |
118 | 63 | 116.2 | 66.0 | 4.575 | 2.598 | 114.2 | 64.0 | 4.496 | 2.520 |
125 | 100 | 123.1 | 102.7 | 4.846 | 4.043 | 121.9 | 101.5 | 4.799 | 3.996 |
125 | 90 | 123.1 | 92.8 | 4.846 | 3.654 | 121.7 | 91.4 | 4.791 | 3.598 |
125 | 80 | 123.1 | 82.9 | 4.846 | 3.264 | 121.4 | 81.2 | 4.780 | 3.197 |
125 | 71 | 123.1 | 74.0 | 4.846 | 2.913 | 121.3 | 72.1 | 4.772 | 2.839 |
132 | 106 | 130.0 | 108.8 | 5.118 | 4.283 | 128.8 | 107.6 | 5.071 | 4.236 |
132 | 90 | 130.0 | 93.0 | 5.118 | 3.661 | 128.4 | 91.4 | 5.055 | 3.598 |
132 | 80 | 130.0 | 83.1 | 5.118 | 3.272 | 128.1 | 81.2 | 5.043 | 3.197 |
132 | 71 | 130.0 | 74.2 | 5.118 | 2.921 | 121.2 | 72.1 | 5.035 | 2.839 |
140 | 112 | 137.9 | 115 | 5.429 | 4.528 | 136.6 | 113.7 | 5.378 | 4.476 |
140 | 100 | 137.9 | 103.1 | 5.429 | 4.059 | 136.3 | 101.5 | 5.366 | 3.996 |
140 | 90 | 137.9 | 93.2 | 5.429 | 3.669 | 136.1 | 91.4 | 5.358 | 3.598 |
140 | 80 | 137.9 | 83.3 | 5.429 | 3.280 | 135.8 | 81.2 | 5.346 | 3.197 |
150 | 125 | 147.7 | 128.1 | 5.815 | 5.043 | 146.5 | 126.9 | 5.768 | 4.996 |
150 | 106 | 147.7 | 109.3 | 5.815 | 4.303 | 146 | 107.6 | 5.748 | 4.236 |
150 | 95 | 147.7 | 98.4 | 5.815 | 3.874 | 145.7 | 96.4 | 5.736 | 3.795 |
150 | 80 | 147.7 | 83.6 | 5.815 | 3.291 | 145.3 | 81.2 | 5.720 | 3.197 |
160 | 132 | 157.6 | 135.3 | 6.205 | 5.327 | 156.3 | 134 | 6.154 | 5.276 |
160 | 122 | 157.6 | 125.4 | 6.205 | 4.937 | 156 | 123.8 | 6.142 | 4.874 |
Locations we have supplied recently:
Skd11 / 1.2379 Tool Steel D2 Round Bar | UK, Philippines, Australia, Nigeria |
Mould Forged Steel Round/square/flat Bar D2 Steel Price | Hong Kong, Oman, Malaysia, UAE |
Mould Steel Round Bar 1.2379 / X155crvmo12-1/ Skd11 / D2 | Iran, Chile, Italy, Singapore |
D2 1.2379 Tool Steel Bar | Norway, United Arab Emirates (UAE), Turkey, Malaysia |
D2 Tool Steel For Alloy Steel Round Steel | Russia, Netherlands, Malaysia, Dubai |
Aisi D2 Tool Steel Round Bar | Mexico, Egypt, Spain, UK |
Alloy 1.2379 Hot Rolled Stainless Steel D2 Steel Round Bar | Malaysia, United Kingdom -UK, Europe, UAE |
Astm A681 D2 Hot Rolled Alloy Mould Steel Round Bar | Poland, UK, Canada, Ellington -United States |
Forged Tool Steel Mirror Bar D2 Round Square Flat Machining Service | Canada, Philippines, Malaysia, Singapore |
Hot Rolled Steel Round Bar D2 Cr12mo1v1/1.2379/skd11 | Romania, Europe, Japan, Malaysia |
Cr12mo1v1/d2/skd11 Steel Alloy Round Bar | Malaysia, Sweden, Colombia, China |
D2 Steel Round Bar Annealed | Los Alamos -Mexico, Malaysia, Taiwan, Philippines |
Tool Steel 1050 D2 Grade Round Bar | NY 12203 (USA), Singapore, South Korea, Malaysia |
D2 Tool Steel Forged Steel Round Bar D2 | Philippines, Dammam -KSA, Indonesia, Belgium |
Astm A681tool Round D2 Steel Bar | Europe, Qatar, France, Thailand |
Alloy Steel Round Bar 40cr 4140 D2 Tool Steel Rod | Thailand, Czechia, Germany, Malaysia |
718h Mncrwv D2 Mould Steel Round Rod | Bangladesh, Malaysia, USA, Finland |
Cold Work Steel Aisi D2 Steel Round Bar | Kuwait, South Africa, Saudi Arabia (KSA), Brazil |
DIN1.2379 D2 SKD11 Hot Rolled Forged Cold Work Mould Steel bar | Singapore, Bahrain, South Africa, Singapore |