Manufacturer of HSS Steel Rod, High Speed Steel Bar Stock
High Speed Steel Round Bar
HSS Steel Rod
High Speed Steel Flat Bar
As a part of tool steels, HSS alloys tend to have the characteristics that are suited to be produced into tooling devices. Often, the HSS Steel Rod would be a part of drill bits or power saw blades. The development of tools steels was to improve the shortcomings of carbon steel. These alloys could be used at higher temperatures unlike carbon steel, without losing their hardness properties. This is why a High Speed Steel Round Bar could be used to cut across faster in comparison to conventional carbon steels, resulting in the name - High speed steel. Typically, the hardness properties of any alloy High Speed Steel Square Bar would be above 60 Rockwell. The chemical composition of some of these alloys would contain elements like tungsten and Vanadium. Both these elements are suited to applications where resistance to wear and abrasion are vital. This is because both tungsten and vanadium increase the hardness of M2 High Speed Steel Rod, thereby preventing external forces to cause any abrasions while keeping the alloy from getting worn out prematurely. One area that makes use of the material is medicine, where the High Speed Steel Rod may be used for surgical instruments and some tools. Tungsten is known for its heat resisting behavior. As the alloy is resistant to heat, High Speed Steel Boring Bar could be used for a longer duration without the occurrence of failure at higher temperatures.
High Speed Carbon Steel Hex/ Flat/ Square And Round Rods Suppliers in India
High Speed Steel Round Bar Application
- Broaches
- Boring Tools
- Chasers
- Cold Forming Rolls
- Cold Heading Inserts
- Hobs
- Lathe and Planer Tools
- Punches
- Milling Cutters
- Taps
- Drills End Mills
- Form Tools
- Reamers and Saws
Types of HSS Steel Rod
Jis G4403 Skh10 Hss High Speed Tool Steel Bar
Hss M2 Steel Mold Steel Alloy Steel Bar Is Alloy Hot Rolled M2/1.3343
M2 Hss Steel Round Rod Bar
High Speed Steel Hss M42 Steel Bright Round Bar 1.3247
12x6mm Construction Metal Hss Hot Rolled Mild Steel Flat Bar
Hss P18 High Speed Tool Steel Round Bar
High Speed Steel Bar Hss Bar Round /flat Bar
Bright Hss Round Bars
Hss Standard Flat Steel Bar
Hss Bohler S600 Steel Round Bar M2 Tool Steel
Hss M42 W2 Tool Steel Round Bar
718h Thick 21-111mm High Speed Tool Steel Flat Bar
High Speed Steel Rod Finish
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
Held wide stock of 10mm High Speed Steel Boring Bar Price in Mumbai, Check HSS Duct and 36 Hanging Rod Surface Condition. Largest High Speed Steel Manufacturers In India
Condition of HSS Boring Bar
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
Chemical Analysis of High Speed Steel Boring Bar
HSS Round Bar Equivalent
One of India’s largest 40mm HSS Round Bar, M2 High Speed Steel Suppliers in india, Check Sizes and Specification of HSS Bar.
Specification of HSS Steel Bar
- Small Dia 20mm to 63 mm
- Medium Dia: 65 mm to 160 mm
- Large Dia: 165mm to 350 mm
HSS Bar Grades
- Grade: M2, M20, M24, M26, M28, M30, M32, M35, M38, M40, M42, M45, M50 M52, W10, etc.
Grades of AISI-SAE Tool Steel
| Defining property | AISI-SAE grade | Significant characteristics |
|---|---|---|
| Water-hardening | W | |
| Cold-working | O | Oil-hardening |
| A | Air-hardening; medium alloy | |
| D | High carbon; high chromium | |
| Shock resisting | S | |
| High speed | T | Tungsten base |
| M | Molybdenum base | |
| Hot-working | H | H1–H19: chromium base H20–H39: tungsten base H40–H59: molybdenum base |
| Plastic mold | P | |
| Special purpose | L | Low alloy |
| F | Carbon tungsten |
largest supplier of small-quantity HSS Square Bar 6mm, High Speed Steel Welding and Drill Rod Price in India. View dia 3-450mm HSS Steel Bar Stock Equivalent
HSS Rod Price
| Hss 4241 Drill High Speed Steel Round Bar W2MoCr4VPrices | SAE 9260 High Speed Barprice list |
| High Speed Tool Steel Bar | US $1.20-$1.50 / Kilogram |
| High speed steel bar T1/DiN1.3355 | US $7.78-$15.55 / Kilogram |
| high speed steel flat bar | US $680.00 / Metric Ton |
HSS Square Bar Size Chart
| Size Chart in Milimeter | Weight Chart per Meter (Kilogram) | Size Chart in Milimeter | Weight Chart per Meter (Kilogram) |
|---|---|---|---|
| 12 x 12 | 1.14 | 30x30 | 7.11 |
| 16 x 16 | 2.02 | 40 x 40 | 12.60 |
| 20 x 20 | 3.16 | 50 x 50 | 19.80 |
| 25 x 25 | 4.94 |
Sizes of High Speed Steel Hex Bar
| Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) |
|---|---|---|---|---|---|
| 7 x 7 | 0.337 | 19 x 19 | 2.479 | 38 x 38 | 9.916 |
| 8 x 8 | 0.44 | 20 x 20 | 2.747 | 40 x 40 | 10.988 |
| 9 x 9 | 0.556 | 21 x 21 | 3.029 | 42 x 42 | 12.114 |
| 10 x 10 | 0.687 | 22 x 22 | 3.324 | 45 x 45 | 13.906 |
| 11 x 11 | 0.831 | 24 x 24 | 3.956 | 48 x 48 | 15.822 |
| 12 x 12 | 0.989 | 25 x 25 | 4.292 | 50 x 50 | 17.168 |
| 13 x 13 | 1.161 | 26 x 26 | 4.642 | 53 x 53 | 19.29 |
| 14 x 14 | 1.346 | 28 x 28 | 5.384 | 55 x 55 | 20.774 |
| 15 x 15 | 1.545 | 30 x 30 | 6.181 | 60 x 60 | 24.723 |
| 16 x 16 | 1.758 | 32 x 32 | 7.032 | 65 x 65 | 29.015 |
| 17 x 17 | 1.985 | 34 x 34 | 7.939 | 70 x 70 | 33.65 |
| 18 x 18 | 2.225 | 36 x 36 | 8.9 | 75 x 75 | 38.629 |
Prestige quality High Speed Steel Suppliers in India offer these High Speed Steel Rod in EN, DIN, ISO, BS, JIS or ANSI standard.
Size of HSS Steel Flat Bar in MM
| Sizes Chart in Milimeter | Sizes in Inch | Thickness Chart In MM | Thickness Chart In Inches |
|---|---|---|---|
| 22 | 7/8 | 17 & 18 | 2/3 - 5/7 |
| 25 | 1 | 5 to 20 | 3/16 - 4/5 |
| 30 | 1-3/16 | 5 to 20 | 3/16 - 4/5 |
| 32 | 1-1/4 | 6 to 20 | 1/4 - 4/5 |
| 35 | 1-3/8 | 5 to 20 | 3/16 - 3/16 |
| 40 | 1-4/7 | 5 to 25 | 3/16 - 1 |
| 45 | 1-7/9 | 5 to 25 | 3/16 - 1 |
| 47 | 1-6/7 | 17,25 & 32 | 2/3, 1 & 1-1/4 |
| 50 | 2 | 5 to 32 | 3/16 - 1-1/4 |
| 55 | 2-1/16 | 5 to 25 | 3/16 - 1 |
| 57 | 2-1/4 | 32 | 1-1/4 |
| 60 | 2-3/8 | 5 to 35 | 3/16 - 1-3/8 |
| 63 | 2-1/2 | 10 to 30 | 3/8 - 1-3/16 |
| 65 | 2-5/9 | 10 to 30 & 35 | 3/8 - 1-3/16, & 1-3/8 |
| 70 | 2-3/4 | 6 to 25 & 40 | 1/4 - 1, & 1-4/7 |
| 75 | 3 | 8 to 25 | 5/16 - 1 |
| 80 | 3-1/8 | 8 to 20 | 5/16 - 4/5 |
| 90 | 3-1/2 | 8 to 20 | 5/16- 4/5 |
| 100 | 4 | 8, 10, 12 | 5/16, 3/8, 1/2 |
ISO Certified High Speed Steel Manufacturers In India
HSS Steel Hollow Bar Sizes
| Size Table in MM | Chucked true to Outside Dia in MM | Chucked true to Inside Dia in MM and Inch | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Outside Dia, Milimeter |
Inside Dia, Milimeter |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches. |
Minimum. Inside Dia, Inches |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches |
Minimum. Inside Dia, Inches |
| 32 | 20 | 31 | 21.9 | 1.220 | 0.862 | 30 | 21 | 1.185 | 0.827 |
| 32 | 16 | 31 | 18 | 1.220 | 0.709 | 30 | 17 | 1.181 | 0.669 |
| 36 | 25 | 35 | 26.9 | 1.378 | 1.059 | 34.1 | 26 | 1.343 | 1.024 |
| 36 | 20 | 35 | 22 | 1.378 | 0.866 | 34 | 21 | 1.339 | 0.827 |
| 36 | 16 | 35 | 18.1 | 1.378 | 0.713 | 33.9 | 17 | 1.335 | 0.669 |
| 40 | 28 | 39 | 29.9 | 1.535 | 1.177 | 38.1 | 29 | 1.500 | 1.142 |
| 40 | 25 | 39 | 27 | 1.535 | 1.063 | 38 | 26 | 1.496 | 1.024 |
| 40 | 20 | 39 | 22.1 | 1.535 | 0.870 | 37.9 | 21 | 1.492 | 0.827 |
| 45 | 32 | 44 | 33.9 | 1.732 | 1.335 | 43.1 | 33 | 1.697 | 1.299 |
| 45 | 28 | 44 | 30 | 1.732 | 1.181 | 43 | 29 | 1.693 | 1.142 |
| 45 | 20 | 44 | 22.2 | 1.732 | 0.874 | 42.8 | 21 | 1.685 | 0.827 |
| 50 | 36 | 49 | 38 | 1.929 | 1.496 | 48 | 37 | 1.890 | 1.457 |
| 50 | 32 | 49 | 34.1 | 1.929 | 1.343 | 47.9 | 33 | 1.886 | 1.299 |
| 50 | 25 | 49 | 27.2 | 1.929 | 1.071 | 47.8 | 26 | 1.882 | 1.024 |
| 56 | 40 | 55 | 42 | 2.165 | 1.654 | 54 | 41 | 2.126 | 1.614 |
| 56 | 36 | 55 | 38.1 | 2.165 | 1.500 | 53.9 | 37 | 2.122 | 1.457 |
| 56 | 28 | 55 | 30.3 | 2.165 | 1.193 | 53.7 | 29 | 2.114 | 1.142 |
| 63 | 50 | 62 | 51.9 | 2.441 | 2.043 | 61.1 | 51 | 2.406 | 2.008 |
| 63 | 45 | 62 | 47 | 2.441 | 1.850 | 61 | 46 | 2.402 | 1.811 |
| 63 | 40 | 62 | 42.2 | 2.441 | 1.661 | 60.8 | 41 | 2.394 | 1.614 |
| 63 | 36 | 62 | 38.3 | 2.441 | 1.508 | 60.7 | 37 | 2.390 | 1.457 |
| 63 | 32 | 62 | 34.4 | 2.441 | 1.354 | 60.6 | 33 | 2.386 | 1.299 |
| 71 | 56 | 69.9 | 58 | 2.752 | 2.283 | 68.9 | 57 | 2.713 | 2.244 |
| 71 | 45 | 69.9 | 47.3 | 2.752 | 1.862 | 68.6 | 46 | 2.701 | 1.811 |
| 71 | 40 | 69.9 | 42.4 | 2.752 | 1.669 | 68.5 | 41 | 2.697 | 1.614 |
| 71 | 36 | 69.9 | 38.5 | 2.752 | 1.516 | 68.4 | 37 | 2.693 | 1.457 |
| 75 | 60 | 73.8 | 62 | 2.906 | 2.441 | 72.8 | 61 | 2.866 | 2.402 |
| 75 | 50 | 73.8 | 52.2 | 2.906 | 2.055 | 72.6 | 51 | 2.858 | 2.008 |
| 75 | 40 | 73.8 | 42.5 | 2.906 | 1.673 | 72.3 | 41 | 2.846 | 1.614 |
| 80 | 63 | 78.8 | 65 | 3.102 | 2.559 | 77.8 | 64 | 3.063 | 2.520 |
| 80 | 50 | 78.8 | 52.4 | 3.102 | 2.053 | 77.4 | 51 | 3.047 | 2.008 |
| 80 | 45 | 78.8 | 47.5 | 3.102 | 1.870 | 77.3 | 46 | 3.043 | 1.811 |
| 80 | 40 | 78.8 | 42.6 | 3.102 | 1.677 | 77.2 | 41 | 3.039 | 1.614 |
| 85 | 67 | 83.7 | 69.1 | 3.295 | 2.720 | 82.6 | 68 | 3.252 | 2.677 |
| 85 | 55 | 83.7 | 57.4 | 3.295 | 2.260 | 82.3 | 56.0 | 3.240 | 2.205 |
| 85 | 45 | 83.7 | 47.6 | 3.295 | 1.874 | 82.1 | 46.0 | 3.232 | 1.811 |
| 90 | 71 | 88.6 | 73.1 | 3.488 | 2.878 | 87.6 | 72.1 | 3.449 | 2.839 |
| 90 | 63 | 88.6 | 65.3 | 3.488 | 2.571 | 87.3 | 64.0 | 3.437 | 2.520 |
| 90 | 56 | 88.6 | 58.5 | 3.488 | 2.303 | 87.1 | 57.0 | 3.429 | 2.244 |
| 90 | 50 | 88.6 | 52.6 | 3.488 | 2.071 | 87.0 | 51.0 | 3.425 | 2.008 |
| 95 | 75 | 93.5 | 77.3 | 3.681 | 3.041 | 92.4 | 76.2 | 3.641 | 2.997 |
| 95 | 67 | 93.5 | 69.3 | 3.681 | 2.728 | 92.2 | 68.0 | 3.630 | 2.677 |
| 95 | 50 | 93.5 | 52.7 | 3.681 | 2.075 | 91.8 | 51.0 | 3.614 | 2.008 |
| 100 | 80 | 98.5 | 82.3 | 3.878 | 3.240 | 97.4 | 81.2 | 3.835 | 3.197 |
| 100 | 71 | 98.5 | 73.4 | 3.878 | 2.890 | 97.2 | 72.1 | 3.827 | 2.839 |
| 100 | 63 | 98.5 | 65.5 | 3.878 | 2.579 | 97.0 | 64.0 | 3.819 | 2.520 |
| 100 | 56 | 98.5 | 58.7 | 3.878 | 2.311 | 96.8 | 57.0 | 3.811 | 2.244 |
| 106 | 80 | 104.4 | 82.5 | 4.110 | 3.248 | 103.1 | 81.2 | 4.059 | 3.197 |
| 106 | 71 | 104.4 | 73.5 | 4.110 | 2.894 | 103.0 | 72.1 | 4.055 | 2.839 |
| 106 | 63 | 104.4 | 65.7 | 4.110 | 2.587 | 102.7 | 64.0 | 4.043 | 2.520 |
| 106 | 56 | 104.4 | 58.9 | 4.110 | 2.319 | 102.5 | 57.0 | 4.035 | 2.244 |
| 112 | 90 | 110.3 | 92.5 | 4.343 | 3.642 | 109.2 | 91.4 | 4.299 | 3.598 |
| 112 | 80 | 110.3 | 82.6 | 4.343 | 3.252 | 108.9 | 81.2 | 4.287 | 3.197 |
| 112 | 71 | 110.3 | 73.7 | 4.343 | 2.902 | 108.7 | 72.1 | 4.280 | 2.839 |
| 112 | 63 | 110.3 | 65.8 | 4.343 | 2.591 | 108.5 | 64.0 | 4.272 | 2.520 |
| 118 | 90 | 116.2 | 92.7 | 4.575 | 3.650 | 114.9 | 91.4 | 4.524 | 3.598 |
| 118 | 80 | 116.2 | 82.8 | 4.575 | 3.260 | 114.6 | 81.2 | 4.512 | 3.197 |
| 118 | 71 | 116.2 | 73.8 | 4.575 | 2.906 | 114.5 | 72.1 | 4.508 | 2.839 |
| 118 | 63 | 116.2 | 66.0 | 4.575 | 2.598 | 114.2 | 64.0 | 4.496 | 2.520 |
| 125 | 100 | 123.1 | 102.7 | 4.846 | 4.043 | 121.9 | 101.5 | 4.799 | 3.996 |
| 125 | 90 | 123.1 | 92.8 | 4.846 | 3.654 | 121.7 | 91.4 | 4.791 | 3.598 |
| 125 | 80 | 123.1 | 82.9 | 4.846 | 3.264 | 121.4 | 81.2 | 4.780 | 3.197 |
| 125 | 71 | 123.1 | 74.0 | 4.846 | 2.913 | 121.3 | 72.1 | 4.772 | 2.839 |
| 132 | 106 | 130.0 | 108.8 | 5.118 | 4.283 | 128.8 | 107.6 | 5.071 | 4.236 |
| 132 | 90 | 130.0 | 93.0 | 5.118 | 3.661 | 128.4 | 91.4 | 5.055 | 3.598 |
| 132 | 80 | 130.0 | 83.1 | 5.118 | 3.272 | 128.1 | 81.2 | 5.043 | 3.197 |
| 132 | 71 | 130.0 | 74.2 | 5.118 | 2.921 | 121.2 | 72.1 | 5.035 | 2.839 |
| 140 | 112 | 137.9 | 115 | 5.429 | 4.528 | 136.6 | 113.7 | 5.378 | 4.476 |
| 140 | 100 | 137.9 | 103.1 | 5.429 | 4.059 | 136.3 | 101.5 | 5.366 | 3.996 |
| 140 | 90 | 137.9 | 93.2 | 5.429 | 3.669 | 136.1 | 91.4 | 5.358 | 3.598 |
| 140 | 80 | 137.9 | 83.3 | 5.429 | 3.280 | 135.8 | 81.2 | 5.346 | 3.197 |
| 150 | 125 | 147.7 | 128.1 | 5.815 | 5.043 | 146.5 | 126.9 | 5.768 | 4.996 |
| 150 | 106 | 147.7 | 109.3 | 5.815 | 4.303 | 146 | 107.6 | 5.748 | 4.236 |
| 150 | 95 | 147.7 | 98.4 | 5.815 | 3.874 | 145.7 | 96.4 | 5.736 | 3.795 |
| 150 | 80 | 147.7 | 83.6 | 5.815 | 3.291 | 145.3 | 81.2 | 5.720 | 3.197 |
| 160 | 132 | 157.6 | 135.3 | 6.205 | 5.327 | 156.3 | 134 | 6.154 | 5.276 |
| 160 | 122 | 157.6 | 125.4 | 6.205 | 4.937 | 156 | 123.8 | 6.142 | 4.874 |
Get the Local reference about material quality in your place of Living
| high speed steel bar HSS bar round /flat bars | United Kingdom -UK, Malaysia, Europe, UAE |
| bright hss round bars | Dammam -KSA, Belgium, Philippines, Indonesia. |
| hss standard flat bars | Qatar, Thailand, Europe, France. |
| HSS Bohler S600 steel round bar M2 tool steel | Malaysia, Thailand, Germany, Czechia |
| HSS M42 w2 tool round bars | Finland, Bangladesh, Malaysia, USA |
| 718H thick 21-111mm high speed tool flat bars | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |
| HSS P18 High Speed Tool Steel Round bars | South Africa, Bahrain, Singapore, Singapore |
| high speed steel HSS M42 Bright Round bars 1.3247 | Philippines, UK, Australia, Nigeria |
| High speed alloy hot forging round bar M42 tool steel | Oman, UAE, Hong Kong, Malaysia |
| 1.3343 High Speed Tool bars M2 | Chile, Singapore, Iran, Italy |
| High speed tool steel forged T4 DIN 1.3255 JIS SKH3 round bars | United Arab Emirates (UAE), Norway, Turkey, Malaysia |
| High speed tool steel forged 1.2738/1.2311/1.231 Round bars | Netherlands, Russia, Malaysia, Dubai |
| HSS stainless steel hexagonal /hex bars | Egypt, UK, Mexico, Spain |
| High Speed Tool Steel Round Bar M2 M35 T1 D2 D3 A2 | UK, Ellington -United States, Poland, Canada |
| TG High speed steel Round bars 1.3343 | Canada, Malaysia, Philippines, Singapore |
| high speed mold HSS M42 Bright Round bars | Japan, Romania, Europe, Malaysia |
| Tool Bar W6Mo5Cr4V2 HSS W6 | Sweden, China, Malaysia, Colombia |