Buy ST52-3 Steel Rod and 1.0580 Steel Hex Bar Online At Best Price In India, Don't Forget To Check Dimensions

ST52 Round Bar

ST52-3 Steel Rod

1.0580 Steel ST52 Hex Bar
Carbon steels contain a significant content of carbon atoms in their chemistry, which gives them very high toughness. Although a higher carbon yields very hard steel, including them to a high degree may make them brittle and leave them unsuited to sub-zero temperature environments. Not all carbon steel is suited to survive in a climate like this. One example of carbon steel that performs well in low temperature settings is the ST 52 Round Bar . With a low content of carbon in comparison to high carbon and medium carbon grades, this alloy contains significant content of manganese in its chemistry. Hence, of all ST52-3 Round Bar Mechanical Properties , it is the good resistance to impact or toughness that makes the material resilient and suited to environments where the temperature reaches the subzero range. A characteristic that makes this grade popular over high and medium carbon alloys is that the ST52 Steel Rod is readily weldable. While corrosion is an issue in the former grades, the lower content of carbon in the material is what permits the ST52 Round Bar to be welded without becoming susceptible to either corrosion or to failure. Usually supplied in a normalized condition, a supplier may also supply the ST52-3 Steel Round Bar in an untreated condition. The most prominent area where the material is used is in engineering, where the ultimate tensile strength of the ST52 Hollow Bar works in its favor.
Manufacturer & Supplier Of ST52 Square and Hollow Bar, We Guarantee Fastest Delivery With All Documents Including Mill Certificate
ST52 Square Bar Price
Round Bar St52 3 | US $15.00-$50.00 / Piece |
hot rolled ms round bar st52-3 price per kg | US $620.00-$700.00 / Ton |
ST52-3 forged steel round bar | US $400.00-$550.00 / Ton |
Different Types of ST52 Round Bar?

St52 Steel Round Bar

St52 S355j0 Forged Steel Round Bar

Carbon Steel 60mm 70mm 75mm Round Bar St52

Carbon Steel Round Bar St52

Low Carbon Steel Round Bar St52-3 St52

Mild Cold Rolled Steel Round Bar St52

Round Bar St52 Square Bar

Round Steel Bar St52

100mm Bar Round St52-3

St52-3 Hot Rolled 6-25mm Deformed Steel Bar

Hot Rolled Round Bars Steel Round Bar St52-3

St52 Corten Steel Forged Round Bar
Chemical Behaviour of ST52-3 Steel Round Bar
Carbon Steel | C | Si | Mn | P | S | Cu | N |
ST 52 | 0,22 | 0,55 | 1,60 | 0,030 | 0,030 | 0,55 | 0,012 |
ST52-3 Round Bar Mechanical Properties
The final delivery condition | Cold drawn(Mandatory) BK1) |
Cold drawn(Soft) BKW1) |
Cold Drawn and Stress Release (BKS) |
Anneal (GBK)1) |
Normalizing (NBK)1) |
|||||||||
Kinds of Steel | Tensile | Elongation | Tensile | Elongation | Tensile | Yield point | Elongation | Tensile | Elongation | Tensile | Yield point | Elongation | ||
Steel grade | Material number | No less than | ||||||||||||
Rm | A5 | Rm | A5 | Rm | ReH | A5 | Rm | A5 | Rm | ReH2) | A5 | |||
N/mm2 | % | N/mm2 | % | N/mm2 | N/mm2 | % | N/mm2 | % | N/mm2 | N/mm2 | % | |||
St52 | 1.0580 | 640 | 4 | 580 | 7 | 580 | 420 | 10 | 490 | 22 | 490~630 | 355 | 22 |
Equivalent Grade of Jis Sm490a Threaded Rod
DIN | EN | JIS | ISO | ASTM | GB | |
ST52-3 | S355JR | SM490A | FE510B | E36-2 | A572Gr.50 | Q345B |
ST52-3 Steel Rod Conditions
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
Why To Pay Extra When We Provide ST52-3 Steel Round Bar & Jis SM490A Threaded Rod In Exact Sizes, Get Free Quote Now!
ST52 Flat Bar Sizes
Sizes Chart in Milimeter | Sizes in Inch | Thickness Chart In MM | Thickness Chart In Inches |
---|---|---|---|
22 | 7/8 | 17 & 18 | 2/3 - 5/7 |
25 | 1 | 5 to 20 | 3/16 - 4/5 |
30 | 1-3/16 | 5 to 20 | 3/16 - 4/5 |
32 | 1-1/4 | 6 to 20 | 1/4 - 4/5 |
35 | 1-3/8 | 5 to 20 | 3/16 - 3/16 |
40 | 1-4/7 | 5 to 25 | 3/16 - 1 |
45 | 1-7/9 | 5 to 25 | 3/16 - 1 |
47 | 1-6/7 | 17,25 & 32 | 2/3, 1 & 1-1/4 |
50 | 2 | 5 to 32 | 3/16 - 1-1/4 |
55 | 2-1/16 | 5 to 25 | 3/16 - 1 |
57 | 2-1/4 | 32 | 1-1/4 |
60 | 2-3/8 | 5 to 35 | 3/16 - 1-3/8 |
63 | 2-1/2 | 10 to 30 | 3/8 - 1-3/16 |
65 | 2-5/9 | 10 to 30 & 35 | 3/8 - 1-3/16, & 1-3/8 |
70 | 2-3/4 | 6 to 25 & 40 | 1/4 - 1, & 1-4/7 |
75 | 3 | 8 to 25 | 5/16 - 1 |
80 | 3-1/8 | 8 to 20 | 5/16 - 4/5 |
90 | 3-1/2 | 8 to 20 | 5/16- 4/5 |
100 | 4 | 8, 10, 12 | 5/16, 3/8, 1/2 |
Carbon Steel ST52 Square Bar Size Chart
Size Chart in Milimeter | Weight Chart per Meter (Kilogram) | Size Chart in Milimeter | Weight Chart per Meter (Kilogram) |
---|---|---|---|
12 x 12 | 1.14 | 30x30 | 7.11 |
16 x 16 | 2.02 | 40 x 40 | 12.60 |
20 x 20 | 3.16 | 50 x 50 | 19.80 |
25 x 25 | 4.94 |
Check Live Price Of Hot Rolled ST52 Flat Bar, View ST52-3 Round Bar Thermal properties
Thermal Properties of Rod ST52
Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (@0.000-100°C/32-212°F) | 12.6 µm/m°C | 7 µin/in°F |
Thermal conductivity (composition of 0.06% C, 0.4% Mn; 0°C ) | 65.2 W/mK | 452 BTU in/hr.ft².°F |
ST52-3 Round Bar Specification Standard
Specifications | ST 52.3, DIN 17100 |
Product | ST 52.3 Round Bar |
Dimensions | , EN, DIN, ASTM, ASME, JIS, BS |
Round Bars Size | 3.0 – 50.8 mm, Over 50.8 – 300mm |
Rectangular Bars Size | 6.35 x 12.7mm,6.35 x 25.4mm,12.7 x 25.4mm |
Hex Bars Size | AF5.8mm–17mm |
Square Bars Size | AF.2mm – 14mm, AF6.35mm, 9.5mm, 12.7mm, 15.98mm, 19.0mm, 25.4mm |
Flat Bars Size | 1/2” to 10” in thickness range of 2mm to 150mm |
Finish | Bright, Polish & Black |
Length | 1 to 6 Meters, Custom Cut Lengths |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc |
Condition | Hardened & tempered, annealed |
Surface | Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished |
Uses of CS ST52 Bar
- Condensers
- Gas Processing
- Petrochemicals
- Pharmaceuticals
- Power Generation
- Chemical Equipment
- Sea Water Equipment
- Specialty Chemicals
- Pulp and Paper Industry
- Boiler & Heat Exchangers
- High Pressure Applications
- off-Shore Oil Drilling Companies
- Food Processing and Dairy Industries
Testing And Documentation of Cs ST52 Black Bar
- Micro test
- Macro test
- Flaring test
- Chemical test
- PMI Testing
- IGC test and hardness test
- Mechanical test and flattening test
Sizing Chart of Din 1.0580 Steel Hex Bar
Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) |
---|---|---|---|---|---|
7 x 7 | 0.337 | 19 x 19 | 2.479 | 38 x 38 | 9.916 |
8 x 8 | 0.44 | 20 x 20 | 2.747 | 40 x 40 | 10.988 |
9 x 9 | 0.556 | 21 x 21 | 3.029 | 42 x 42 | 12.114 |
10 x 10 | 0.687 | 22 x 22 | 3.324 | 45 x 45 | 13.906 |
11 x 11 | 0.831 | 24 x 24 | 3.956 | 48 x 48 | 15.822 |
12 x 12 | 0.989 | 25 x 25 | 4.292 | 50 x 50 | 17.168 |
13 x 13 | 1.161 | 26 x 26 | 4.642 | 53 x 53 | 19.29 |
14 x 14 | 1.346 | 28 x 28 | 5.384 | 55 x 55 | 20.774 |
15 x 15 | 1.545 | 30 x 30 | 6.181 | 60 x 60 | 24.723 |
16 x 16 | 1.758 | 32 x 32 | 7.032 | 65 x 65 | 29.015 |
17 x 17 | 1.985 | 34 x 34 | 7.939 | 70 x 70 | 33.65 |
18 x 18 | 2.225 | 36 x 36 | 8.9 | 75 x 75 | 38.629 |
ST52 Hollow Bar Sizes
Size Table in MM | Chucked true to Outside Dia in MM | Chucked true to Inside Dia in MM and Inch | |||||||
---|---|---|---|---|---|---|---|---|---|
Outside Dia, Milimeter |
Inside Dia, Milimeter |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches. |
Minimum. Inside Dia, Inches |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches |
Minimum. Inside Dia, Inches |
32 | 20 | 31 | 21.9 | 1.220 | 0.862 | 30 | 21 | 1.185 | 0.827 |
32 | 16 | 31 | 18 | 1.220 | 0.709 | 30 | 17 | 1.181 | 0.669 |
36 | 25 | 35 | 26.9 | 1.378 | 1.059 | 34.1 | 26 | 1.343 | 1.024 |
36 | 20 | 35 | 22 | 1.378 | 0.866 | 34 | 21 | 1.339 | 0.827 |
36 | 16 | 35 | 18.1 | 1.378 | 0.713 | 33.9 | 17 | 1.335 | 0.669 |
40 | 28 | 39 | 29.9 | 1.535 | 1.177 | 38.1 | 29 | 1.500 | 1.142 |
40 | 25 | 39 | 27 | 1.535 | 1.063 | 38 | 26 | 1.496 | 1.024 |
40 | 20 | 39 | 22.1 | 1.535 | 0.870 | 37.9 | 21 | 1.492 | 0.827 |
45 | 32 | 44 | 33.9 | 1.732 | 1.335 | 43.1 | 33 | 1.697 | 1.299 |
45 | 28 | 44 | 30 | 1.732 | 1.181 | 43 | 29 | 1.693 | 1.142 |
45 | 20 | 44 | 22.2 | 1.732 | 0.874 | 42.8 | 21 | 1.685 | 0.827 |
50 | 36 | 49 | 38 | 1.929 | 1.496 | 48 | 37 | 1.890 | 1.457 |
50 | 32 | 49 | 34.1 | 1.929 | 1.343 | 47.9 | 33 | 1.886 | 1.299 |
50 | 25 | 49 | 27.2 | 1.929 | 1.071 | 47.8 | 26 | 1.882 | 1.024 |
56 | 40 | 55 | 42 | 2.165 | 1.654 | 54 | 41 | 2.126 | 1.614 |
56 | 36 | 55 | 38.1 | 2.165 | 1.500 | 53.9 | 37 | 2.122 | 1.457 |
56 | 28 | 55 | 30.3 | 2.165 | 1.193 | 53.7 | 29 | 2.114 | 1.142 |
63 | 50 | 62 | 51.9 | 2.441 | 2.043 | 61.1 | 51 | 2.406 | 2.008 |
63 | 45 | 62 | 47 | 2.441 | 1.850 | 61 | 46 | 2.402 | 1.811 |
63 | 40 | 62 | 42.2 | 2.441 | 1.661 | 60.8 | 41 | 2.394 | 1.614 |
63 | 36 | 62 | 38.3 | 2.441 | 1.508 | 60.7 | 37 | 2.390 | 1.457 |
63 | 32 | 62 | 34.4 | 2.441 | 1.354 | 60.6 | 33 | 2.386 | 1.299 |
71 | 56 | 69.9 | 58 | 2.752 | 2.283 | 68.9 | 57 | 2.713 | 2.244 |
71 | 45 | 69.9 | 47.3 | 2.752 | 1.862 | 68.6 | 46 | 2.701 | 1.811 |
71 | 40 | 69.9 | 42.4 | 2.752 | 1.669 | 68.5 | 41 | 2.697 | 1.614 |
71 | 36 | 69.9 | 38.5 | 2.752 | 1.516 | 68.4 | 37 | 2.693 | 1.457 |
75 | 60 | 73.8 | 62 | 2.906 | 2.441 | 72.8 | 61 | 2.866 | 2.402 |
75 | 50 | 73.8 | 52.2 | 2.906 | 2.055 | 72.6 | 51 | 2.858 | 2.008 |
75 | 40 | 73.8 | 42.5 | 2.906 | 1.673 | 72.3 | 41 | 2.846 | 1.614 |
80 | 63 | 78.8 | 65 | 3.102 | 2.559 | 77.8 | 64 | 3.063 | 2.520 |
80 | 50 | 78.8 | 52.4 | 3.102 | 2.053 | 77.4 | 51 | 3.047 | 2.008 |
80 | 45 | 78.8 | 47.5 | 3.102 | 1.870 | 77.3 | 46 | 3.043 | 1.811 |
80 | 40 | 78.8 | 42.6 | 3.102 | 1.677 | 77.2 | 41 | 3.039 | 1.614 |
85 | 67 | 83.7 | 69.1 | 3.295 | 2.720 | 82.6 | 68 | 3.252 | 2.677 |
85 | 55 | 83.7 | 57.4 | 3.295 | 2.260 | 82.3 | 56.0 | 3.240 | 2.205 |
85 | 45 | 83.7 | 47.6 | 3.295 | 1.874 | 82.1 | 46.0 | 3.232 | 1.811 |
90 | 71 | 88.6 | 73.1 | 3.488 | 2.878 | 87.6 | 72.1 | 3.449 | 2.839 |
90 | 63 | 88.6 | 65.3 | 3.488 | 2.571 | 87.3 | 64.0 | 3.437 | 2.520 |
90 | 56 | 88.6 | 58.5 | 3.488 | 2.303 | 87.1 | 57.0 | 3.429 | 2.244 |
90 | 50 | 88.6 | 52.6 | 3.488 | 2.071 | 87.0 | 51.0 | 3.425 | 2.008 |
95 | 75 | 93.5 | 77.3 | 3.681 | 3.041 | 92.4 | 76.2 | 3.641 | 2.997 |
95 | 67 | 93.5 | 69.3 | 3.681 | 2.728 | 92.2 | 68.0 | 3.630 | 2.677 |
95 | 50 | 93.5 | 52.7 | 3.681 | 2.075 | 91.8 | 51.0 | 3.614 | 2.008 |
100 | 80 | 98.5 | 82.3 | 3.878 | 3.240 | 97.4 | 81.2 | 3.835 | 3.197 |
100 | 71 | 98.5 | 73.4 | 3.878 | 2.890 | 97.2 | 72.1 | 3.827 | 2.839 |
100 | 63 | 98.5 | 65.5 | 3.878 | 2.579 | 97.0 | 64.0 | 3.819 | 2.520 |
100 | 56 | 98.5 | 58.7 | 3.878 | 2.311 | 96.8 | 57.0 | 3.811 | 2.244 |
106 | 80 | 104.4 | 82.5 | 4.110 | 3.248 | 103.1 | 81.2 | 4.059 | 3.197 |
106 | 71 | 104.4 | 73.5 | 4.110 | 2.894 | 103.0 | 72.1 | 4.055 | 2.839 |
106 | 63 | 104.4 | 65.7 | 4.110 | 2.587 | 102.7 | 64.0 | 4.043 | 2.520 |
106 | 56 | 104.4 | 58.9 | 4.110 | 2.319 | 102.5 | 57.0 | 4.035 | 2.244 |
112 | 90 | 110.3 | 92.5 | 4.343 | 3.642 | 109.2 | 91.4 | 4.299 | 3.598 |
112 | 80 | 110.3 | 82.6 | 4.343 | 3.252 | 108.9 | 81.2 | 4.287 | 3.197 |
112 | 71 | 110.3 | 73.7 | 4.343 | 2.902 | 108.7 | 72.1 | 4.280 | 2.839 |
112 | 63 | 110.3 | 65.8 | 4.343 | 2.591 | 108.5 | 64.0 | 4.272 | 2.520 |
118 | 90 | 116.2 | 92.7 | 4.575 | 3.650 | 114.9 | 91.4 | 4.524 | 3.598 |
118 | 80 | 116.2 | 82.8 | 4.575 | 3.260 | 114.6 | 81.2 | 4.512 | 3.197 |
118 | 71 | 116.2 | 73.8 | 4.575 | 2.906 | 114.5 | 72.1 | 4.508 | 2.839 |
118 | 63 | 116.2 | 66.0 | 4.575 | 2.598 | 114.2 | 64.0 | 4.496 | 2.520 |
125 | 100 | 123.1 | 102.7 | 4.846 | 4.043 | 121.9 | 101.5 | 4.799 | 3.996 |
125 | 90 | 123.1 | 92.8 | 4.846 | 3.654 | 121.7 | 91.4 | 4.791 | 3.598 |
125 | 80 | 123.1 | 82.9 | 4.846 | 3.264 | 121.4 | 81.2 | 4.780 | 3.197 |
125 | 71 | 123.1 | 74.0 | 4.846 | 2.913 | 121.3 | 72.1 | 4.772 | 2.839 |
132 | 106 | 130.0 | 108.8 | 5.118 | 4.283 | 128.8 | 107.6 | 5.071 | 4.236 |
132 | 90 | 130.0 | 93.0 | 5.118 | 3.661 | 128.4 | 91.4 | 5.055 | 3.598 |
132 | 80 | 130.0 | 83.1 | 5.118 | 3.272 | 128.1 | 81.2 | 5.043 | 3.197 |
132 | 71 | 130.0 | 74.2 | 5.118 | 2.921 | 121.2 | 72.1 | 5.035 | 2.839 |
140 | 112 | 137.9 | 115 | 5.429 | 4.528 | 136.6 | 113.7 | 5.378 | 4.476 |
140 | 100 | 137.9 | 103.1 | 5.429 | 4.059 | 136.3 | 101.5 | 5.366 | 3.996 |
140 | 90 | 137.9 | 93.2 | 5.429 | 3.669 | 136.1 | 91.4 | 5.358 | 3.598 |
140 | 80 | 137.9 | 83.3 | 5.429 | 3.280 | 135.8 | 81.2 | 5.346 | 3.197 |
150 | 125 | 147.7 | 128.1 | 5.815 | 5.043 | 146.5 | 126.9 | 5.768 | 4.996 |
150 | 106 | 147.7 | 109.3 | 5.815 | 4.303 | 146 | 107.6 | 5.748 | 4.236 |
150 | 95 | 147.7 | 98.4 | 5.815 | 3.874 | 145.7 | 96.4 | 5.736 | 3.795 |
150 | 80 | 147.7 | 83.6 | 5.815 | 3.291 | 145.3 | 81.2 | 5.720 | 3.197 |
160 | 132 | 157.6 | 135.3 | 6.205 | 5.327 | 156.3 | 134 | 6.154 | 5.276 |
160 | 122 | 157.6 | 125.4 | 6.205 | 4.937 | 156 | 123.8 | 6.142 | 4.874 |
Manufacturer & Supplier Of Carbon ST.52 Forged/ Black Bar Surface Finish and St 52.3 Steel Equivalent And Material
Carbon ST.52 Forged Bar Surface Finish
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
ST52 Steel Rod Density
Density: 7.85 g/cm3
Bar Flat ST52 Processing
- Heat Resistance
- Fabrication
- Cold Working
- Hot Working
- Heat Treatment
- Machining
- Welding
ST52-3 Steel Round Bar Melting Point
Melting point: 1420-1460 °C (2590-2660 °F)
Now you decide who is the best supplier of ST-52 Round Bar in Following countries
1.0580 steel round bars | South Africa, Kuwait, Brazil, Saudi Arabia (KSA) |
St52 S355J0 Forged Steel round Bars | Nigeria, Australia, Philippines, UK |
carbon steel 60mm 70mm 75mm round bar st52 | Malaysia, Hong Kong, Oman, UAE |
carbon steel round bar st52 | Singapore, Bahrain, South Africa |
Low carbon steel round bar st52-3 st52 | Italy, Iran, Chile, Singapore |
mild cold rolled steel round bar 1.0580 | Turkey, Norway, Malaysia, United Arab Emirates (UAE) |
round bar st52 square bars | Dammam -KSA, Belgium, Philippines, Indonesia. |
Round Steel Bars 1.0580 | Canada, Malaysia, Philippines, Singapore |
100mm bar round st52-3 | Europe, Romania, Japan, Malaysia |
st52-3 Hot Rolled 6-25mm Deformed Steel Bars | Colombia, Sweden, China, Malaysia |
hot rolled round bars steel round bar st52-3 | Netherlands, Russia, Dubai, Malaysia |
ST52 corten steel forged round bars | Egypt, UK, Mexico, Spain |
1.0580 cold drawn carbon steel round bars | Ellington -United States, Poland, Canada, UK |
st52 Cold Drawn Steel Solid Round Bars | United Kingdom -UK, Europe, UAE, Malaysia |
St52 Black Steel Round Bars | Thailand, Europe, France, Qatar |
St52 Steel Round Bars | Czechia, Malaysia, Germany, Thailand |
1.0580 hollow bars | Finland, USA, Bangladesh, Malaysia |