UNS C15000 Alloy Round Bar Manufacturer In India
Zirconium Copper Rod
UNS C15000 Alloy Round Bar
Copper Zirconium Hex Bar
High thermal and electrical conductivity are properties of alloys that are non-ferrous. This means that the alloys do not contain iron in their chemical composition. The Zirconium Copper Rod is an example of a non-ferrous alloy. Materials that have electrical conductivity have a small degree of resistance to electricity. This small degree of resistance in the alloy permits the flow of electricity within the UNS C15000 Triangular Bars. Due to its excellent electrical conduction, the alloy is used in applications that are involved in electrical motors, generators, circuit breakers, etc. The corrosion resistance properties of Copper Zirconium Round Bars are worth mentioning, especially its resistance to atmospheric corrosion, which would cause several conventional steels to become susceptible to failure. With 99% of the alloy containing copper, Copper Zirconium Alloy Forged Bars are resilient to corrosion in marine environments. They share similar traits like that of pure copper including the antimicrobial finish, while also being a bacteriostatic material. Therefore the UNS c15000 Zirconium Copper Square finds multiple uses in marine engineering applications and in the shipping industry as well. In addition to being very ductile, which makes it easy to form them into various shapes. This alloy also has good toughness.
Exporter and supplier of Copper Zirconium Hex Bar in cut to sizes to save your cost as per International standard
Zirconium Copper Rod Chemical Properties
| Element | Content (%) |
|---|---|
| Cu | 99.80 min |
| Zr | 10 -.20 |
What are the different types of UNS C15000 Alloy Round Bar?
22mm Dia Zirconium Copper Alloy Cuzr High Conductivity Uns C15000 Flat Bars
Zirconium Copper Alloy Round Bar /rod
C15000 Copper Rod
C15000 Zirconium Copper Bar/ Rods
Zirconium Copper Bars C15000
Zirconium Copper Flat Bar
Zirconium Copper Alloy Square Bar Hexagonal Bar
Copper Zirconium Flat Bar
Uns C15000 Zirconium Copper Sqaure
Copper Zirconium Hex Bar Density
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.89 g/cm3 | 0.321 lb/in3 |
| Melting point | 980°C | 1796°F |
buy directly from manufacturer of UNS c15000 Zirconium Copper Sqaure and Flat Bar material online and save cost, check Mechanical Properties
Mechanical Composition of Zirconium Copper Round Bar
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength, ultimate | 430 MPa | 62400 psi |
| Tensile strength, yield | 415 MPa | 60200 psi |
| Elongation at break (in 50 mm) | 15.00% | 15.00% |
| Modulus of elasticity | 129 GPa | 18700 ksi |
| Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
Physical Composition Chart of UNS c15000 Zirconium Copper Sqaure
| US CUSTOMARY | METRIC | |
|---|---|---|
| MELTING POINT – LIQUIDUS | 1976 F | 1080 C |
| MELTING POINT – SOLIDUS | 1796 F | 980 C |
| DENSITY | 0.321 LB/IN3 AT 68 F | 8.89 GM/CM3 @ 20 C |
| SPECIFIC GRAVITY | 8.89 | 8.89 |
| ELECTRICAL RESISTIVITY | 11.2 OHMS–CMIL/FT @ 68 F | 1.86 MICROHM–CM @ 20 C |
| ELECTRICAL CONDUCTIVITY* | 93% IACS @ 68 F | 0.544 MEGASIEMENS/CM @ 20 C |
| THERMAL CONDUCTIVITY | 212.0 BTU · FT/(HR · FT2·OF)AT 68F | 366.9 W/M · OK AT 20 C |
| COEFFICIENT OF THERMAL EXPANSION | 9.4 ·10–6 PER OF (68–212 F) | 16.9 ·10–6 PER OC (20–100 C) |
| COEFFICIENT OF THERMAL EXPANSION | 9.8 ·10–6 PER OF (68–572 F) | 17.6 ·10–6 PER OC (20–300 C) |
| SPECIFIC HEAT CAPACITY | 0.092 BTU/LB/OF AT 68 F | 393.5 J/KG · OK AT 293 K |
| MODULAS OF ELASTICITY IN TENSION | 18700 KSI | 129000 MPA |
We Can Supply CUZR DIN 2.1580 Bar With Customized Thickness And Diameter, View properties of Copper Zirconium Alloy Forged Bars
Copper Zirconium Flat Bar Fabrication Properties
| Technique | Suitability |
|---|---|
| Soldering | Excellent |
| Brazing | Good |
| Oxyacetylene Welding | Not Recommended |
| Gas Shielded Arc Welding | Not Recommended |
| Coated Metal Arc Welding | Not Recommended |
| Spot Weld | Not Recommended |
| Seam Weld | Not Recommended |
| Butt Weld | Good |
| Capacity for Being Cold Worked | Excellent |
| Capacity for Being Hot Formed | Excellent |
| Machinability Rating | 20 |
CUZR DIN 2.1580 Bar Fabrication Process
- Bending
- heading
- Hot forging
- Machining
- Swaging
Copper Zirconium Alloy Forged Bars Uses
- Spot Welding Adapters
- Spot Welding Electrodes
- Seam Weld Wheels
- Aerospace
- Electricity Production
- Spot Welding Galvanized Materials
Thermal Composition of Copper Zirconium Round Bars
| Treatment | Minimum* | Maximum* | Value* | Time** | Medium |
|---|---|---|---|---|---|
| Solution Treatment | 1650 | 1700 | 0.3 | Water | |
| Precipitation Treatment | 980 | 2 | Water | ||
| Hot Treatment | 1650 | 1740 |
Looking for specific size in Copper Zirconium Round Bars? Check UNS C15000 Triangular Bar stock, Specification and Price in India.
UNS C15000 Triangular Bars Specification Schedule
| Finishing | Polished |
| Feature | Corrosion Proof, Excellent Quality, Fine Finishing, High Strength, Perfect Shape |
| Type | Zirconium Copper Alloys |
| Thickness | 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm, 60-70mm, 70-80mm, 80-90mm, 90-100mm |
| Shape | Rectangular, Round |
| Length | 1-1000mm, 1000-2000mm, 2000-3000mm, 3000-4000mm, 4000-5000mm |
| Dimensions | 10-100mm, 100-200mm, 200-300mm, 300-400mm, 400-500mm, 500-600mm, 600-700mm, 700-800mm, 800-900mm, 900-1000mm |
| Certifications | ISI Certified |
| Material | C15000 |
| Application | Automobile Industries, Construction, Marine Applications |
| Grade | AISI, ASTM, BS, DIN, GB, JIS |
C15000 Cuzr Cw120c Zirconium Copper Hollow Bar Sizes
| Size Table in MM | Chucked true to Outside Dia in MM | Chucked true to Inside Dia in MM and Inch | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Outside Dia, Milimeter |
Inside Dia, Milimeter |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches. |
Minimum. Inside Dia, Inches |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches |
Minimum. Inside Dia, Inches |
| 32 | 20 | 31 | 21.9 | 1.220 | 0.862 | 30 | 21 | 1.185 | 0.827 |
| 32 | 16 | 31 | 18 | 1.220 | 0.709 | 30 | 17 | 1.181 | 0.669 |
| 36 | 25 | 35 | 26.9 | 1.378 | 1.059 | 34.1 | 26 | 1.343 | 1.024 |
| 36 | 20 | 35 | 22 | 1.378 | 0.866 | 34 | 21 | 1.339 | 0.827 |
| 36 | 16 | 35 | 18.1 | 1.378 | 0.713 | 33.9 | 17 | 1.335 | 0.669 |
| 40 | 28 | 39 | 29.9 | 1.535 | 1.177 | 38.1 | 29 | 1.500 | 1.142 |
| 40 | 25 | 39 | 27 | 1.535 | 1.063 | 38 | 26 | 1.496 | 1.024 |
| 40 | 20 | 39 | 22.1 | 1.535 | 0.870 | 37.9 | 21 | 1.492 | 0.827 |
| 45 | 32 | 44 | 33.9 | 1.732 | 1.335 | 43.1 | 33 | 1.697 | 1.299 |
| 45 | 28 | 44 | 30 | 1.732 | 1.181 | 43 | 29 | 1.693 | 1.142 |
| 45 | 20 | 44 | 22.2 | 1.732 | 0.874 | 42.8 | 21 | 1.685 | 0.827 |
| 50 | 36 | 49 | 38 | 1.929 | 1.496 | 48 | 37 | 1.890 | 1.457 |
| 50 | 32 | 49 | 34.1 | 1.929 | 1.343 | 47.9 | 33 | 1.886 | 1.299 |
| 50 | 25 | 49 | 27.2 | 1.929 | 1.071 | 47.8 | 26 | 1.882 | 1.024 |
| 56 | 40 | 55 | 42 | 2.165 | 1.654 | 54 | 41 | 2.126 | 1.614 |
| 56 | 36 | 55 | 38.1 | 2.165 | 1.500 | 53.9 | 37 | 2.122 | 1.457 |
| 56 | 28 | 55 | 30.3 | 2.165 | 1.193 | 53.7 | 29 | 2.114 | 1.142 |
| 63 | 50 | 62 | 51.9 | 2.441 | 2.043 | 61.1 | 51 | 2.406 | 2.008 |
| 63 | 45 | 62 | 47 | 2.441 | 1.850 | 61 | 46 | 2.402 | 1.811 |
| 63 | 40 | 62 | 42.2 | 2.441 | 1.661 | 60.8 | 41 | 2.394 | 1.614 |
| 63 | 36 | 62 | 38.3 | 2.441 | 1.508 | 60.7 | 37 | 2.390 | 1.457 |
| 63 | 32 | 62 | 34.4 | 2.441 | 1.354 | 60.6 | 33 | 2.386 | 1.299 |
| 71 | 56 | 69.9 | 58 | 2.752 | 2.283 | 68.9 | 57 | 2.713 | 2.244 |
| 71 | 45 | 69.9 | 47.3 | 2.752 | 1.862 | 68.6 | 46 | 2.701 | 1.811 |
| 71 | 40 | 69.9 | 42.4 | 2.752 | 1.669 | 68.5 | 41 | 2.697 | 1.614 |
| 71 | 36 | 69.9 | 38.5 | 2.752 | 1.516 | 68.4 | 37 | 2.693 | 1.457 |
| 75 | 60 | 73.8 | 62 | 2.906 | 2.441 | 72.8 | 61 | 2.866 | 2.402 |
| 75 | 50 | 73.8 | 52.2 | 2.906 | 2.055 | 72.6 | 51 | 2.858 | 2.008 |
| 75 | 40 | 73.8 | 42.5 | 2.906 | 1.673 | 72.3 | 41 | 2.846 | 1.614 |
| 80 | 63 | 78.8 | 65 | 3.102 | 2.559 | 77.8 | 64 | 3.063 | 2.520 |
| 80 | 50 | 78.8 | 52.4 | 3.102 | 2.053 | 77.4 | 51 | 3.047 | 2.008 |
| 80 | 45 | 78.8 | 47.5 | 3.102 | 1.870 | 77.3 | 46 | 3.043 | 1.811 |
| 80 | 40 | 78.8 | 42.6 | 3.102 | 1.677 | 77.2 | 41 | 3.039 | 1.614 |
| 85 | 67 | 83.7 | 69.1 | 3.295 | 2.720 | 82.6 | 68 | 3.252 | 2.677 |
| 85 | 55 | 83.7 | 57.4 | 3.295 | 2.260 | 82.3 | 56.0 | 3.240 | 2.205 |
| 85 | 45 | 83.7 | 47.6 | 3.295 | 1.874 | 82.1 | 46.0 | 3.232 | 1.811 |
| 90 | 71 | 88.6 | 73.1 | 3.488 | 2.878 | 87.6 | 72.1 | 3.449 | 2.839 |
| 90 | 63 | 88.6 | 65.3 | 3.488 | 2.571 | 87.3 | 64.0 | 3.437 | 2.520 |
| 90 | 56 | 88.6 | 58.5 | 3.488 | 2.303 | 87.1 | 57.0 | 3.429 | 2.244 |
| 90 | 50 | 88.6 | 52.6 | 3.488 | 2.071 | 87.0 | 51.0 | 3.425 | 2.008 |
| 95 | 75 | 93.5 | 77.3 | 3.681 | 3.041 | 92.4 | 76.2 | 3.641 | 2.997 |
| 95 | 67 | 93.5 | 69.3 | 3.681 | 2.728 | 92.2 | 68.0 | 3.630 | 2.677 |
| 95 | 50 | 93.5 | 52.7 | 3.681 | 2.075 | 91.8 | 51.0 | 3.614 | 2.008 |
| 100 | 80 | 98.5 | 82.3 | 3.878 | 3.240 | 97.4 | 81.2 | 3.835 | 3.197 |
| 100 | 71 | 98.5 | 73.4 | 3.878 | 2.890 | 97.2 | 72.1 | 3.827 | 2.839 |
| 100 | 63 | 98.5 | 65.5 | 3.878 | 2.579 | 97.0 | 64.0 | 3.819 | 2.520 |
| 100 | 56 | 98.5 | 58.7 | 3.878 | 2.311 | 96.8 | 57.0 | 3.811 | 2.244 |
| 106 | 80 | 104.4 | 82.5 | 4.110 | 3.248 | 103.1 | 81.2 | 4.059 | 3.197 |
| 106 | 71 | 104.4 | 73.5 | 4.110 | 2.894 | 103.0 | 72.1 | 4.055 | 2.839 |
| 106 | 63 | 104.4 | 65.7 | 4.110 | 2.587 | 102.7 | 64.0 | 4.043 | 2.520 |
| 106 | 56 | 104.4 | 58.9 | 4.110 | 2.319 | 102.5 | 57.0 | 4.035 | 2.244 |
| 112 | 90 | 110.3 | 92.5 | 4.343 | 3.642 | 109.2 | 91.4 | 4.299 | 3.598 |
| 112 | 80 | 110.3 | 82.6 | 4.343 | 3.252 | 108.9 | 81.2 | 4.287 | 3.197 |
| 112 | 71 | 110.3 | 73.7 | 4.343 | 2.902 | 108.7 | 72.1 | 4.280 | 2.839 |
| 112 | 63 | 110.3 | 65.8 | 4.343 | 2.591 | 108.5 | 64.0 | 4.272 | 2.520 |
| 118 | 90 | 116.2 | 92.7 | 4.575 | 3.650 | 114.9 | 91.4 | 4.524 | 3.598 |
| 118 | 80 | 116.2 | 82.8 | 4.575 | 3.260 | 114.6 | 81.2 | 4.512 | 3.197 |
| 118 | 71 | 116.2 | 73.8 | 4.575 | 2.906 | 114.5 | 72.1 | 4.508 | 2.839 |
| 118 | 63 | 116.2 | 66.0 | 4.575 | 2.598 | 114.2 | 64.0 | 4.496 | 2.520 |
| 125 | 100 | 123.1 | 102.7 | 4.846 | 4.043 | 121.9 | 101.5 | 4.799 | 3.996 |
| 125 | 90 | 123.1 | 92.8 | 4.846 | 3.654 | 121.7 | 91.4 | 4.791 | 3.598 |
| 125 | 80 | 123.1 | 82.9 | 4.846 | 3.264 | 121.4 | 81.2 | 4.780 | 3.197 |
| 125 | 71 | 123.1 | 74.0 | 4.846 | 2.913 | 121.3 | 72.1 | 4.772 | 2.839 |
| 132 | 106 | 130.0 | 108.8 | 5.118 | 4.283 | 128.8 | 107.6 | 5.071 | 4.236 |
| 132 | 90 | 130.0 | 93.0 | 5.118 | 3.661 | 128.4 | 91.4 | 5.055 | 3.598 |
| 132 | 80 | 130.0 | 83.1 | 5.118 | 3.272 | 128.1 | 81.2 | 5.043 | 3.197 |
| 132 | 71 | 130.0 | 74.2 | 5.118 | 2.921 | 121.2 | 72.1 | 5.035 | 2.839 |
| 140 | 112 | 137.9 | 115 | 5.429 | 4.528 | 136.6 | 113.7 | 5.378 | 4.476 |
| 140 | 100 | 137.9 | 103.1 | 5.429 | 4.059 | 136.3 | 101.5 | 5.366 | 3.996 |
| 140 | 90 | 137.9 | 93.2 | 5.429 | 3.669 | 136.1 | 91.4 | 5.358 | 3.598 |
| 140 | 80 | 137.9 | 83.3 | 5.429 | 3.280 | 135.8 | 81.2 | 5.346 | 3.197 |
| 150 | 125 | 147.7 | 128.1 | 5.815 | 5.043 | 146.5 | 126.9 | 5.768 | 4.996 |
| 150 | 106 | 147.7 | 109.3 | 5.815 | 4.303 | 146 | 107.6 | 5.748 | 4.236 |
| 150 | 95 | 147.7 | 98.4 | 5.815 | 3.874 | 145.7 | 96.4 | 5.736 | 3.795 |
| 150 | 80 | 147.7 | 83.6 | 5.815 | 3.291 | 145.3 | 81.2 | 5.720 | 3.197 |
| 160 | 132 | 157.6 | 135.3 | 6.205 | 5.327 | 156.3 | 134 | 6.154 | 5.276 |
| 160 | 122 | 157.6 | 125.4 | 6.205 | 4.937 | 156 | 123.8 | 6.142 | 4.874 |
Rwma Class 1 Square Bar Size Chart
| Size Chart in Milimeter | Weight Chart per Meter (Kilogram) | Size Chart in Milimeter | Weight Chart per Meter (Kilogram) |
|---|---|---|---|
| 12 x 12 | 1.14 | 30x30 | 7.11 |
| 16 x 16 | 2.02 | 40 x 40 | 12.60 |
| 20 x 20 | 3.16 | 50 x 50 | 19.80 |
| 25 x 25 | 4.94 |
Sizes Of Uns C15000 Bar
| Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) |
|---|---|---|---|---|---|
| 7 x 7 | 0.337 | 19 x 19 | 2.479 | 38 x 38 | 9.916 |
| 8 x 8 | 0.44 | 20 x 20 | 2.747 | 40 x 40 | 10.988 |
| 9 x 9 | 0.556 | 21 x 21 | 3.029 | 42 x 42 | 12.114 |
| 10 x 10 | 0.687 | 22 x 22 | 3.324 | 45 x 45 | 13.906 |
| 11 x 11 | 0.831 | 24 x 24 | 3.956 | 48 x 48 | 15.822 |
| 12 x 12 | 0.989 | 25 x 25 | 4.292 | 50 x 50 | 17.168 |
| 13 x 13 | 1.161 | 26 x 26 | 4.642 | 53 x 53 | 19.29 |
| 14 x 14 | 1.346 | 28 x 28 | 5.384 | 55 x 55 | 20.774 |
| 15 x 15 | 1.545 | 30 x 30 | 6.181 | 60 x 60 | 24.723 |
| 16 x 16 | 1.758 | 32 x 32 | 7.032 | 65 x 65 | 29.015 |
| 17 x 17 | 1.985 | 34 x 34 | 7.939 | 70 x 70 | 33.65 |
| 18 x 18 | 2.225 | 36 x 36 | 8.9 | 75 x 75 | 38.629 |
Din 2.1580 Flat Bar Sizes
| Sizes Chart in Milimeter | Sizes in Inch | Thickness Chart In MM | Thickness Chart In Inches |
|---|---|---|---|
| 22 | 7/8 | 17 & 18 | 2/3 - 5/7 |
| 25 | 1 | 5 to 20 | 3/16 - 4/5 |
| 30 | 1-3/16 | 5 to 20 | 3/16 - 4/5 |
| 32 | 1-1/4 | 6 to 20 | 1/4 - 4/5 |
| 35 | 1-3/8 | 5 to 20 | 3/16 - 3/16 |
| 40 | 1-4/7 | 5 to 25 | 3/16 - 1 |
| 45 | 1-7/9 | 5 to 25 | 3/16 - 1 |
| 47 | 1-6/7 | 17,25 & 32 | 2/3, 1 & 1-1/4 |
| 50 | 2 | 5 to 32 | 3/16 - 1-1/4 |
| 55 | 2-1/16 | 5 to 25 | 3/16 - 1 |
| 57 | 2-1/4 | 32 | 1-1/4 |
| 60 | 2-3/8 | 5 to 35 | 3/16 - 1-3/8 |
| 63 | 2-1/2 | 10 to 30 | 3/8 - 1-3/16 |
| 65 | 2-5/9 | 10 to 30 & 35 | 3/8 - 1-3/16, & 1-3/8 |
| 70 | 2-3/4 | 6 to 25 & 40 | 1/4 - 1, & 1-4/7 |
| 75 | 3 | 8 to 25 | 5/16 - 1 |
| 80 | 3-1/8 | 8 to 20 | 5/16 - 4/5 |
| 90 | 3-1/2 | 8 to 20 | 5/16- 4/5 |
| 100 | 4 | 8, 10, 12 | 5/16, 3/8, 1/2 |
Zirconium Copper Rods Tolerance Chart
| Tolerances Chart | ||
|---|---|---|
| Shapes / Section | Sizes, Dia or width across flats | Permitted variation |
| MM | MM | |
| Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
| Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
| Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
| Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
Tolerances of Turned UNS R60705 ZR Bar (BS 970-3)
| Turned UNS R60705 Zirconium Bar Tolerances | |
|---|---|
| Zirconium Rod dia and Size CHart | Permitted variation |
| MM | milimeter |
| ≧ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 120 > 120 ≦ 180 > 180 ≦ 250 > 250 ≦ 315 > 315 ≦ 400 > 400 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 + 0 to - 0.160 + 0 to - 0.185 + 0 to - 0.210 + 0 to - 0.230 + 0 to - 0.250 |
Tolerances of Precision ZR Rod (BS 970-3)
| Precision Tolerances Chart | ||||
|---|---|---|---|---|
| Section | Size Chart, Dia |
Permitted overall variation | ||
| Class A | Class B | Class C | ||
| Milimeter | Milimeter | Milimeter | Milimeter | |
| Round | ≧ 6 <75 | 0.05 | 0.025 | 0.013 |
Tolerance of ZR 702 Round Bar (BS EN ISO 286-2 )
| Cold Drawn Hot Rolled /Cold Drawn Tolerance ISO “H” Series in Milimeter | ||||||||
|---|---|---|---|---|---|---|---|---|
| NOMINAL SIZE CHART | h5 | h6 | h7 | h8 | h9 | H10 | H11 | h12 |
| DIA. MM | ||||||||
| ~ to 3 | +0.004/0 | +0.006/0 | +0.01/0 | +0.014/0 | +0.025/0 | +0.04/0 | +0.06/0 | +0.1/0 |
| 3 to 6 | +0.005/0 | +0.008/0 | +0.012/0 | +0.018/0 | +0.03/0 | +0.048/0 | +0.075/0 | +0.12/0 |
| 6 to 10 | +0.006/0 | +0.009/0 | +0.015/0 | +0.022/0 | +0.036/0 | +0.058/0 | +0.09/0 | +0.15/0 |
| 10 to 18 | +0.008/0 | +0.011/0 | +0.018/0 | +0.027/0 | +0.043/0 | +0.07/0 | +0.11/0 | +0.18/0 |
| 18 to 30 | +0.009/0 | +0.013/0 | +0.021/0 | +0.033/0 | +0.052/0 | +0.084/0 | +0.13/0 | +0.21/0 |
| 30 to 50 | +0.011/0 | +0.016/0 | +0.025/0 | +0.039/0 | +0.062/0 | +0.1/0 | +0.16/0 | +0.25/0 |
| 50 to 80 | +0.013/0 | +0.019/0 | +0.03/0 | +0.046/0 | +0.074/0 | +0.12/0 | +0.19/0 | +0.3/0 |
| 80 to 120 | +0.015/0 | +0.022/0 | +0.035/0 | +0.054/0 | +0.087/0 | +0.14/0 | +0.22/0 | +0.35/0 |
| 120 to 180 | +0.018/0 | +0.025/0 | +0.04/0 | +0.063/0 | +0.1/0 | +0.16/0 | +0.25/0 | +0.4/0 |
| 180 to 250 | +0.02/0 | +0.029/0 | +0.046/0 | +0.072/0 | +0.115/0 | +0.185/0 | +0.29/0 | +0.46/0 |
Cuzr Alloy Bar Weight Chart
| Diameter in Inches | Diameter (in/mm) | Weight Chart | Weight per 12' Length |
| 3/32 inches | 0.0938 inches 2.38252 mm | 0.0247 lbs/ft 0.03675854 kg/m | 0.297 lbs 0.1346895 kg |
| 1/8 inches | 0.125 inches 3.175 mm | 0.0439 lbs/ft 0.06533198 kg/m | 0.527 lbs 0.2389945 kg |
| 3/16 inches | 0.1875 inches 4.7625 mm | 0.0987 lbs/ft 0.14688534 kg/m | 1.185 lbs 0.5373975 kg |
| 1/4 inches | 0.25 inches 6.35 mm | 0.1755 lbs/ft 0.2611791 kg/m | 2.106 lbs 0.955071 kg |
| 7/16 inches | 0.4375 inches 11.1125 mm | 0.5376 lbs/ft 0.80005632 kg/m | 6.451 lbs 2.9255285 kg |
| 15/32 inches | 0.4688 inches 11.90752 mm | 0.6173 lbs/ft 0.91866586 kg/m | 7.407 lbs 3.3590745 kg |
| 17/32 inches | 0.5313 inches 13.49502 mm | 0.7928 lbs/ft 1.17984496 kg/m | 9.514 lbs 4.314599 kg |
| 9/16 inches | 0.5625 inches 14.2875 mm | 0.8887 lbs/ft 1.32256334 kg/m | 10.664 lbs 4.836124 kg |
| 5/8 inches | 0.625 inches 15.875 mm | 1.0971 lbs/ft 1.63270422 kg/m | 13.165 lbs 5.9703275 kg |
| 3/4 inches | 0.75 inches 19.05 mm | 1.5798 lbs/ft 2.35105836 kg/m | 18.958 lbs 8.597453 kg |
| 13/16 inches | 0.8125 inches 20.6375 mm | 1.8541 lbs/ft 2.75927162 kg/m | 22.249 lbs 10.0899215 kg |
| 7/8 inches | 0.875 inches 22.225 mm | 2.1503 lbs/ft 3.20007646 kg/m | 25.804 lbs 11.702114 kg |
| 15/16 inches | 0.9375 inches 23.8125 mm | 2.4685 lbs/ft 3.6736217 kg/m | 29.622 lbs 13.433577 kg |
| 1 inches | 1 inches 25.4 mm | 2.8086 lbs/ft 4.17975852 kg/m | 33.703 lbs 15.2843105 kg |
| 1 1/16 inches | 1.0625 inches 26.9875 mm | 3.1706 lbs/ft 4.71848692 kg/m | 38.048 lbs 17.254768 kg |
| 1 1/8 inches | 1.125 inches 28.575 mm | 3.5546 lbs/ft 5.28995572 kg/m | 42.655 lbs 19.3440425 kg |
| 1 3/16 inches | 1.1875 inches 30.1625 mm | 3.9606 lbs/ft 5.89416492 kg/m | 47.527 lbs 21.5534945 kg |
| 1 1/4 inches | 1.25 inches 31.75 mm | 4.3884 lbs/ft 6.53081688 kg/m | 52.661 lbs 23.8817635 kg |
| 1 5/16 inches | 1.3125 inches 33.3375 mm | 4.8382 lbs/ft 7.20020924 kg/m | 58.059 lbs 26.3297565 kg |
| 1 3/8 inches | 1.375 inches 34.925 mm | 5.31 lbs/ft 7.902342 kg/m | 63.720 lbs 28.89702 kg |
| 1 1/2 inches | 1.5 inches 38.1 mm | 6.3193 lbs/ft 9.40438226 kg/m | 75.832 lbs 34.389812 kg |
| 1 5/8 inches | 1.625 inches 41.275 mm | 7.4164 lbs/ft 11.03708648 kg/m | 88.997 lbs 40.3601395 kg |
| 1 3/4 inches | 1.75 inches 44.45 mm | 8.6013 lbs/ft 12.80045466 kg/m | 103.216 lbs 46.808456 kg |
| 1 7/8 inches | 1.875 inches 47.625 mm | 9.8740 lbs/ft 14.6944868 kg/m | 118.487 lbs 53.7338545 kg |
| 2 inches | 2 inches 50.8 mm | 11.2344 lbs/ft 16.71903408 kg/m | 134.812 lbs 61.137242 kg |
Cda 150 Zirconium Copper Round Bar Forging
C15000 copper alloys are forged at temperature ranging from 899 to 949°C (1650 to 1740°F).
Zirconium Copper Alloy Polished Bar Hardness
- Hardness (HV): 75-165
Alloy Cuzr Round Bar Sizes
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
| Cold Drawn and Ground | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
| Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
| Cold Drawn and Polish | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Zirconium Copper Round Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).
| 5.0 | 45.0 |
| 6.0 | 50.0 |
| 7.0 | 55.0 |
| 8.0 | 60.0 |
| 9.0 | 65.0 |
| 10.0 | 70.0 |
| 12.0 | 75.0 |
| 16.0 | 80.0 |
| 20.0 | 90.0 |
| 25.0 | 100.0 |
| 30.0 | 130.0 |
| 35.0 | 160.0 |
| 40.0 | 200.0 |
Zirconium Copper Melting Point
| Properties | Metric | Imperial |
|---|---|---|
| Melting point | 980°C | 1796°F |
C15000 Alloy Bars Conditions
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
Surface Finish Of C15000 Cuzr Black Bars
| CG-Centreless ground | HF | Hot finished |
| CF-Cold finished | HRAP-Hot rolled annealed and pickled | |
| CD-Cold drawn | P-Polished | |
| BD-Bright drawn | SRE-Slit rolled edge | |
| P&T-Peeled and turned | RT-Rough turned/peeled | |
| ST-Smooth turned | PR-Peeled and reeled |
You can check our associates and dealers at different part of world
| Copper Zirconium Hex Bar | Norway, Malaysia, Turkey, United Arab Emirates (UAE) |
| Uns C15000 Zirconium Copper Sqaure | Belgium, Philippines, Dammam -KSA, Indonesia. |
| Copper Zirconium Flat Bar | Malaysia, Philippines, Canada, Singapore |
| Cuzr Din 2.1580 Bar | Romania, Japan, Europe, Malaysia |
| Copper Zirconium Alloy Forged Bars | Sweden, China, Colombia, Malaysia |
| Copper Zirconium Round Bars | Russia, Dubai, Netherlands, Malaysia |
| Uns C15000 Triangular Bars | Kuwait, Brazil, South Africa, Saudi Arabia (KSA) |
| Rwma Class 1 Zirconium Copper Rod For Resistance Welding Electrode C15000 | Australia, Philippines, Nigeria, UK |
| 22mm Dia Zirconium Copper Alloy Cuzr High Conductivity Uns C15000 Flat Bars | Hong Kong, Oman, Malaysia, UAE |
| Zirconium Copper Alloy Round Bar /rod | Bahrain, Singapore, South Africa |
| C15000 Copper Rod | Europe, France, Thailand, Qatar |
| C15000 Zirconium Copper Bar/ Rods | Malaysia, Germany, Czechia, Thailand |
| Zirconium Copper Bars C15000 | USA, Bangladesh, Finland, Malaysia |
| Zirconium Copper Flat Bar | Chile, Singapore, Italy, Iran |
| Zirconium Copper Alloy Square Bar Hexagonal Bar | UK, Mexico, Egypt, Spain |
| Zirconium Copper Rod | Poland, Canada, Ellington -United States, UK |
| Uns C15000 Alloy Round Bar | Europe, UAE, United Kingdom -UK, Malaysia |