P20 Steel Plate

  • Home
  • P20 Steel Plate

DIN 1.2311 Mold Steel Sheet and P20 Tool Steel Plates supplier in India


P20 Steel Plate

P20 Steel Plate

DIN 1.2311 Mold Steel Sheet

DIN 1.2311 Mold Steel Sheet

P20 Tool Steel Plates

P20 Tool Steel Plates

Steels designated with the letter P are low alloy steels whose chemical composition includes Chromium. The presence of chromium in the chemistry of the alloy accentuates the hardness and toughness properties of the P20 Steel Plate. As a tool steel grade, the characteristic of the alloy is its moderate strength that is useful in various applications. The material is so versatile that its hardness is put to use in tooling applications in addition to casting dies for zinc. Another common use of the P20 Mould Steel Foil is in the production of plastic injection mold cavities. Generally, this tool steel grade is available in a pre-hardened condition. In this condition, the hardness property of the alloy is valued to be as high as 300 HBW. In order to improve the hardness of the material, manufacturers may use either a nitriding or carburizing process on the P20 Mold Steel Hot Rolled Plates. Though these alloys are typically utilized in a carburized condition. During carburization, the alloy is heated in the presence of a carbon rich source. These sources could vary. In a typical situation, the AISI P20 Coils could be heat treated in the presence of either carbon monoxide or charcoal, both sources have an abundance of carbon atoms in their structures. The deposition of carbon atoms on the surface layer will be absorbed by the alloy of the P20 High Hard Steel Shim Sheet. This in turn will increase its hardness making it tough and more durable.

ISO Certified P20 Tool Steel Plates Manufacturer in India, Buy P20 Steel Strip at best price in Mumbai


P20 Steel Plate Equivalent

Country USA German GB/T
Standard ASTM A681 DIN EN ISO 4957 GB/T 1299
Grades P20 1.2311 3Cr2Mo

ASTM A681 C Mn P S Si Cr Mo
P20 0.28 0.4 0.6 1 0.03 0.03 0.2 0.8 1.4 2 0.3 0.55
DIN ISO 4957 C Mn P S Si Cr Mo
1.2311 0.35 0.45 1.3 1.6 0.03 0.03 0.2 0.4 1.8 2.1 0.15 0.25
GB/T C Mn P S Si Cr Mo
GBT 1299 0.28 0.4 0.6 1 0.03 0.03 0.2 0.8 1.4 2 0.3 0.55

Various Types of DIN 1.2311 Mold Steel Sheet

P20 Steel Plate / 1.2311 Mold Steel

P20 Steel Plate / 1.2311 Mold Steel

1.2738 P20 Steel Plates

1.2738 P20 Steel Plates

1.2311 Plastic Mould Steel p20 plates

1.2311 Plastic Mould Steel p20 plates

P20 Plastic Mold Steel Plate DIN1.233 /718/718H Tool Steel

P20 Plastic Mold Steel Plate DIN1.233 /718/718H Tool Steel

AISI P20+Ni steel mould plate 1.2738/ 2738/3Cr2NiMo plastic mould steel

AISI P20+Ni steel mould plate 1.2738/ 2738/3Cr2NiMo plastic mould

AISI P20/ DIN 1.2311/ 2311 steel plate hot rolled tool steel plate hot rolled

AISI P20/ DIN 1.2311/ 2311 steel plate hot rolled tool plate hot rolled

s50c carbon steel plate p20 and s50c steel sheet

s50c carbon steel plate p20 and s50c sheet

P20 Alloy Steel Plate

P20 Alloy Steel Plate

1.2312 P20+S Plastic Mould Tool Steel Plate

1.2312 P20+S Plastic Mould Tool Plate

aisi a2 p20 mould steel plate

aisi a2 p20 mould steel plate

1.2311 P20 40CrMnMo7 Tool Steel Plate

1.2311 P20 40CrMnMo7 Tool Plate

Mould Steel Dme1.2312 / 3cr2mo / P20 Steel Plate

Mould Steel Dme1.2312 / 3cr2mo / P20 Plate

Manufacturer and supplier of AISI P20 Coils and P20 Mold Steel Hot Rolled Plates in India, view Mechanical Properties, dimensions and Specification

Mechanical Properties of P20 Tool Steel Plates

Properties Metric
Hardness, Brinell (typical) 300
Hardness, Rockwell C (typical) 30
Tensile strength, ultimate 965-1030 MPa
Tensile strength, yield 827-862 MPa
Elongation at break (in 50 mm (2″)) 20.00%
Compressive strength 862 MPa
Charpy impact (V-Notch) 27.1-33.9 J
Poisson’s ratio 0.27-0.30
Elastic modulus 190-210 GPa

P20 Steel Strip Application

  • Bolsters
  • Injection moulds
  • Deep set mould tools
  • Die holders
  • Casting dies

Thermal Properties of AISI P20 Coils

Properties

Conditions

T (°C)

Treatment

Thermal expansion 12.8 x 10-6/ºC 20-425

P20 Mold Steel Hot Rolled Plates Forging Properties

AISI P20 steel forged at 1093°C (2000°F) down to 899°C (1650°F). Not Forging below 871°C (1600°F).

Manufacturer and supplier of P20 High Hard Steel Shim Sheet, view P20 Mould Steel Foil price price list, AISI P20 Steel Cold Rolled Plates properties

P20 High Hard Steel Shim Sheet Properties

  • Density: 0.284 lb/in3 (7861 kg/m3)
  • Specific Gravity: 7.86
  • Modulus of Elasticity: 30 x 106 psi (207 GPa)
  • Thermal Conductivity:
  • 24 Btu/ft/hr/°F
  • 41.5 W/m/°K
  • Machinability: 60-65% of a 1% carbon steel

P20 Mould Steel Foil Size Range

Plate: Thickness 10-800mm x Width 210-2300mm

Buy from 1.2311 Steel Chequered Plates manufacturers in India for better price and quality, Check P20 Steel Sheets properties and updated price list

AISI P20 Steel Cold Rolled Plates Price Per Kg

P20 Mould Steel Sheet Prices P20 High Hard Shim Sheet Price List
1.2311 plastic mould material P20 pre-harden steel sheets US $500.00-$1215 / Ton
Steel 1.2312 Steel Sheets US $700.00-$1500 / Ton
DIN1.2311 P20 40CrMnMo7 Tool sheet US $1.50-$3.50 / Kilogram

1.2311 Steel Chequered Plates Heat Treatment

Tempering p20 steels are tempered at 482-593°C (900 to 1100°F)
Annealing Annealing at 760-788°C (1400 to 1450°F)
Welding Conventional methods Used for welding of p20 steels
Heat Treatment P20 tool steels are heated to 871-899°C (1600-1650°F)

Features Of P20 Steel Foil

  • Direct Mould Cutting
  • Pre Hardened
  • No Heat Treatment
  • Corrosion Resistance
  • Welding Performance
  • Permeability
  • Final Grinding

Characteristics Of P20 Alloy Steel Plate

  • a good atmospheric corrosion resistance,
  • an excellent polishability,
  • a good machinability in annealed condition,
  • a high hardenability
  • a good wear resistance

Composition Standard of P20 Steel Sheets

Element Content (%)
C 0.28-0.40
Mn 0.60-1.00
Si 0.20-0.80
Cr 1.40-2.00
Mo 0.30-0.55
Cu 0.25
P 0.03
S 0.03

An Indian Manufacturer but Global supplier, check what and where

Aisi A2 P20 Mould Steels Plate United Kingdom -UK, Malaysia, Europe, UAE
1.2311 P20 40crmnmo7 Tool Steels Plate Dammam -KSA, Belgium, Philippines, Indonesia.
Mould Steel Dme1.2312 / 3cr2mo / P20 Steels Plate Qatar, Thailand, Europe, France.
P20/din 1.2311/3cr2mo/618 Steels Plate Malaysia, Thailand, Germany, Czechia
Low Alloy 1.2311 Mould Steel P20 High Strength Steels Sheet Finland, Bangladesh, Malaysia, USA
Mold Steels Plate Gm 1.2311 1.2312 P20 Saudi Arabia (KSA), Kuwait, South Africa, Brazil
1.2311 1.2311 P20 Alloy Steels Plate South Africa, Bahrain, Singapore, Singapore
P20 Din 1.2311 Plastic Mold Steels Plate Philippines, UK, Australia, Nigeria
Aisi P20/ Din 1.2311/ 2311 Steel Plate Hot Rolled Tool Steels Plate Hot Rolled Oman, UAE, Hong Kong, Malaysia
P20 Steel Plate Chile, Singapore, Iran, Italy
Din 1.2311 Mold Steels Sheet United Arab Emirates (UAE), Norway, Turkey, Malaysia
P20 Tool Steels Plates Netherlands, Russia, Malaysia, Dubai
P20 Steels Strip Egypt, UK, Mexico, Spain
Aisi P20 Coils UK, Ellington -United States, Poland, Canada
P20 Mold Steel Hot Rolled Plates Canada, Malaysia, Philippines, Singapore
P20 High Hard Steels Shim Sheet Japan, Romania, Europe, Malaysia
P20 Mould Steels Foil Sweden, China, Malaysia, Colombia

P20 Steel Plate Manufacturer in India

Call us

+91 22 66595934