ASTM B209 DIN 3.1255 Foil Suppliers, Aluminium 2014 Plate Price In India.
2014 Aluminum Sheet
ASTM B209 DIN 3.1255 Foil
Aluminium 2014 Plate
While some alloys lose their mechanical properties at a low temperature, Aluminium alloys generally tend to show an increase in their tensile strength. As a low density alloy, the Aluminium 2014 Plate is considered to be the ideal material for the aerospace industry. The high strength properties also are the reason why this grade of 2014 Aluminum Sheet is used in aerospace structural applications. Machining the alloy is possible when the ASTM B209 Aluminum Alloy 2014 Coils are in an annealed condition. With good machinability in some tempers, it is possible for the alloy to be made into one of the strongest aluminum based alloys. These tempers improve the hardness properties of the Hot Rolled Aluminum 2014 Plate. These sheets and strips, unfortunately, do not have decent corrosion resistance properties. However, this property can be remedied by simply cladding the View ASME SB209 Aluminium 2014 Strips with pure aluminum. Moreover, the corrosion resistance properties could be improved by the use of surface treatments or paints that aid in the prevention of corrosion. It is not recommended to weld this alloy. Welding has a disastrous effect on the Aluminium Alloy 2014 Flat Sheet as it becomes susceptible to cracking.
View ASTM B209 DIN 3.1255 Plate, Check 2014 Aluminium HR/ CR Sheets Sizes
Aluminium 2014 Plate Specification Table
| Specification Standard | ASTM B209 and ASME SB209 |
| Thickness Chart in Milimeter | 0.2 to 300 mm |
| Length in MM | 500 - 10000 Milimeter |
| Width in MM | 500 to 2500 Milimeter |
| Surface Finishes of Plates | hair line, Bright, polished, brush, checkered, sand blast, embossed |
| Types of Plate & Sheet | Cold-Rolled / Hot-Rolled/ Plates/ Strips/ Chequered Plates/ Coils |
| Coatings | Polyester, PVC Coated, Color Coated, Fluorocarbon, polyurethane, epoxy coating |
Held wide stock of 10mm ASME SB209 Aluminium 2014 Strips Cut To Size, Werkstoff-Nr. 3.1255 coil, Check Aluminium 2014 Sheet Chemcal Composition
Chemical Composition of DIN 3.1255 Sheet
| Alloy | Si | Fe | Cu | Zn | Mn | Mg | Ti | Other | Cr | Ni | Others | Ti+Zr | Al |
| 2014 (min) (max) | 0.50 - 0.90 | 0.0 - 0.50 | 3.90 - 5.00 | 0.0 - 0.25 | 0.40 - 1.20 | 0.20 - 0.80 | 0.0 - 0.15 | 0.0 - 0.15 | 0.0 - 0.10 | 0.0 - 0.10 | 0.0 - 0.05 | 0.0 - 0.20 | Balance |
ASTM B209 Aluminum Alloy 2014 Coils Properties
| Alloy | Temper | UTS (Mpa) | Yield Strength (Mpa) | Elongation (%) | ||
| - | - | Minimum | Maximum | Minimum | Maximum | A 50mm (Minimum) |
| EN AW-2014 | O | – | 250 | – | 135 | 10 |
| T4 | 370 | – | 230 | – | 11 | |
Top-notch Stockist Of ASTM B209 2014 Aluminium Alloy Chequered Plate Manufacturers In Mumbai, Check Equivalent of 2014 Aluminium Alloy Diamond Plates
Equivalent Grades of 2014 Aluminium HR Plate
| European Standard | BS (OLD) | WNr | UNS | ISO | USA (AA) | GERMANY (DIN) | IS | Canadian |
| EN AW-2014 | HE15 | 3.1255 | A92014 | AlCu4SiMg | 2014 | AlCuSiMn | 24345 | B26S |
View ASME SB209 Aluminium 2014 Strips Types
Aluminum Sheet 2014 T351 T4 T3
Sheet 2014 Diamond Aluminum
2014 He30 Aluminum Sheet
Aluminium Sheet 2014 T6
Alloy 2014 T6 Aluminum Sheet
2014 H16 Aluminium Sheet 0.2mm
0.3mm 0.4mm 0.5mm Raw Material 2014 T4 T415 Aluminum Sheet
6mm 2014 Aluminium Sheet
2500mm 2014 T6 Aluminum Coil Sheet
Aluminium Alloy 2014 Flat Sheet Processing
- Hot rolled
- Cold rolled
- Cutting
- Forming Drilling/ Machining
- Grinding
- Polishing
- Testing
Density of Hot Rolled Aluminum 2014 Plate
| Physical Property | Value |
|---|---|
| Density | 2.82 g/cm³ |
Aluminium Alloy A92014 Perforated Sheet Elasticity
| Physical Property | Value |
|---|---|
| Modulus of Elasticity | 71 GPa |
ASTM B209 Aluminium 2014 T6 Sheet Uses
- Packaging & Transportation
- Structural architectural parts
- Heat exchangers
- Aerospace Engineering
- Automotive
Electrical Properties of Aluminium Alloy 2014 Sheets
| Physical Property | Value |
|---|---|
| Electrical Resistivity | 0.045 x10^-6 Ω .m |
Aluminium 2014 Sheet Thermal Conductivity
| Physical Property | Value |
|---|---|
| Thermal Conductivity | 138 W/m.K |
| Thermal Expansion | 23 x10^-6 /K |
largest supplier of small-quantity ASME SB209 Aluminium Alloy 2014 Cold/ Hot Rolled Sheet, Aluminum 2014 Plate Suppliers In India, Check Alloy 2014 Shim/ Perforated Sheet Price List
Price List of ASME SB209 UNS A92014 Plate
| 2014 t3 aluminum sheet price per kg | 2014 Aluminum alloy steel plate /sheetprices |
| 2014 Sheet Aluminium Alloy Sheet | US $2.50-$25.00 / Kilogram |
| Astm 2014 10mm thick metal boat Aluminium alloy Sheet | US $2885-$2900 / Ton |
| Aluminium Alloy 2014 Sheet | US $2659-$4899 / Metric Ton |
| 2014 Aluminum Alloy Sheet | US $4800-$5300 / Ton |
Aluminium Alloy 2014 Hot Rolled Sheet Weight Chart
| Thickness Chart in Inches | Density | Plate Weight Chart per Unit Area |
|---|---|---|
| 3/16 | 0.315 lbs/in³8.72 g/cm³ | 0.06000 lbs/in²42.184176 kg/m² |
| 1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.08 lbs/in²56.245568 kg/m² |
| 3/8 | 0.315 lbs/in³8.72 g/cm³ | 0.121 lbs/in²85.0714216 kg/m² |
| 1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.161 lbs/in²113.1942056 kg/m² |
| 5/8 | 0.315 lbs/in³8.72 g/cm³ | 0.196 lbs/in²137.8016416 kg/m² |
| 3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.235 lbs/in²165.221356 kg/m² |
| 7/8 | 0.315 lbs/in³8.72 g/cm³ | 0.274 lbs/in²192.6410704 kg/m² |
| 1 | 0.315 lbs/in³8.72 g/cm³ | 0.313 lbs/in²220.0607848 kg/m² |
| 1 1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.391 lbs/in²274.9002136 kg/m² |
| 1 1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.47 lbs/in²330.442712 kg/m² |
| 1 3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.549 lbs/in²385.9852104 kg/m² |
| 2 | 0.315 lbs/in³8.72 g/cm³ | 0.627 lbs/in²440.8246392 kg/m² |
| 2 1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.705 lbs/in²495.664068 kg/m² |
| 2 1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.784 lbs/in²551.2065664 kg/m² |
| 2 3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.862 lbs/in²606.0459952 kg/m² |
| 3 | 0.315 lbs/in³8.72 g/cm³ | 0.941 lbs/in²661.5884936 kg/m² |
Dimension of 2014 Aluminium Alloy Chequered Plate
| Surface finish of Plate | Thickness chart (Milimeter) | Width (Maximum Milimeter) |
|---|---|---|
| 2B – heat treated, Cold rolled, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2D – heat treated, Cold rolled, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – heat treated, Cold rolled, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – bright annealed plate, Cold rolled | 0.25–3.5 | 1524 |
| brushed, Polished Plate | 0.5–4.0 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
Imperial Dimensions
| Surface finish of Plate | Gauge chart (Inch) | Width (Maximum Inch) |
|---|---|---|
| 2B – heat treated, Cold rolled, pickled, skin passed Sheet | 10–24 | 72* |
| 2D – heat treated, Cold rolled, pickled Sheet | 12–24 | 60 |
| Polished Sheet (not brushed) | 11–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Temper rolled Sheet Mexinox only | 13–29 | 48 |
Aluminium Alloy Diamond Plate Melting Temperature
| Physical Property | Value |
|---|---|
| Melting Point | 535 °C |
we are looking for importers in these locations
| 0.3mm 0.4mm 0.5mm Raw Material 2014 T4 T415 Aluminum Sheet | South Africa, Kuwait, Brazil, Saudi Arabia (KSA) |
| 6mm 2014 Aluminium Sheet | Nigeria, Australia, Philippines, UK |
| 2500mm 2014 T6 Aluminum Coil Sheet | Malaysia, Hong Kong, Oman, UAE |
| 2014 T6 Al Sheets | Singapore, Bahrain, South Africa |
| 2mm Thickness 2014 Aluminium Shim Sheet | Italy, Iran, Chile, Singapore |
| 2mm 3mm 5mm Thickness Aluminum Alloy 2014 T6 Plate | Turkey, Norway, Malaysia, United Arab Emirates (UAE) |
| 2014 T6 T3 Aluminum Alloy Sheet/plate | Dammam -KSA, Belgium, Philippines, Indonesia. |
| Aluminum Plate 2014 T3 | Canada, Malaysia, Philippines, Singapore |
| 1x1250x2500 Mm Thickness Aluminum Sheet 2014 T6 Temper | Europe, Romania, Japan, Malaysia |
| Aluminium Alloy Sheet Plate 2014 | Colombia, Sweden, China, Malaysia |
| 2014 T6 Aluminium 2mm Alloy Sheet Plate | Netherlands, Russia, Dubai, Malaysia |
| 2014 Decorative Pefortated Sheet | Egypt, UK, Mexico, Spain |
| 2014 Aluminum Checkered Plate And Sheet | Ellington -United States, Poland, Canada, UK |
| 2mm Aluminum Plate / Aluminum Sheets 2014 | United Kingdom -UK, Europe, UAE, Malaysia |
| 2014 Aluminium Roll Coil | Thailand, Europe, France, Qatar |
| 3.0mm Thickness 2014 Aluminum Carved Sheet | Czechia, Malaysia, Germany, Thailand |
| 2014 H16 Aluminium Sheet 0.2mm | Finland, USA, Bangladesh, Malaysia |