Din 3.4144 Shim Sheet manufacturer, Check 8011 Aluminium Coil Sizes

8011 Aluminum Foil

Din 3.4144 Shim Sheet

8011 Aluminium Coil
A wrought alloy grade, alumiun 8011 is an alloy that contains a high content of silicon in its chemical composition. To bring about the best in the alloys, it is very common for the 8011 Aluminium Foil to be tempered. Usually, tempers designated as H14 & H18 are practiced on this grade. The letter designation H indicates that the alloy is tempered by strain-hardening. Strain hardening is considered to be ab ideal choice for non-heat-treatable alloys such as Din 3.4144 Shim Sheet. This is because strain hardening tends to improve their strength. A temper such as strain hardening is practiced typically at room temperature. In the case of Aluminium 8011 H18, the alloy is cold worked severely such that it equals an approximate fo 75% reduction in are. The other common temper designation is T14, where the material is Strain hardened, or what is also referred to as cold worked. Cold working the 8011 Aluminium Coil is minus thermal treatment and is half hard. One of the benefits of using this temper is that the alloy gets resistant to cracking 8011 Aluminum Foil, permitting the worker to either emboss or deboss this material without becoming susceptible to cracking. The Aluminium 8011 Thermal Conductivity is about 237 W/mk. Lastly, aside from increased strength due to tempering, the 8011 Aluminum Material Properties include excellent surface properties, for instance - good wettability and decent resistance to corrosion.
Latest Hot Rolled 8011 Aluminium Plate Price in India, UNS A98011 Strips and 8011 Aluminium Foil Weight Chart
8011 Aluminium Coil Chemical Structure
Grade | Si | Fe | Cu | Zn | Mn | Mg | Ti | Cr | Al | Others(Total) |
Aluminium | 0.40 – 0.80 | 0.70 max | 0.15-0.40 | 0.25 max | 0.15 | 0.8-1.2 | 0.15 max | 0.04-0.35 | Balance | 0.15 max |
8011 Aluminium Sheet, Din 3.4144 Chequered/ Flat Plate, Check 8011 Aluminum Material Properties and Price List
8011 Aluminum Material Properties
Temper | Tensile | Hardness | ||||
Ultimate | Yield | Elongation | Brinell | |||
KSI | MPA | KSI | MPA | % | ||
T6, T651 | 45 | 310 | 21 | 145 | 25 | 65 |
Material | Temper | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation in 2" % |
Aluminium Alloy 8011 Angle (AMS 4340) | T76511 | 79 | 69 | 7 |
Aluminium Alloy 8011 Angle (AMS 4340) | T73511 | 70 | 60 | 8 |
Aluminium Alloy 8011 Angle (AMS 4342) | T74511 | 73 | 63 | 7 |
Types of 8011 Aluminium Foil

1.0mm Aluminum Sheet 8011 Temper O

8011 Aluminum Sheet 8x4

Aluminum Sheet 8011 H14

8011 Aluminum Alloy Plate

8011 Aluminium Roofing Sheet

8011 Aluminum Coil Hot Rolled Mill Finish Aluminum Coil / Roll Sheet

Aluminum Foils 8011 Cold Rolled Aluminum Coils/sheet

8011 10mm Aluminum Plate

8011 Alloy Aluminum Sheet

10mm Aluminum Embossed Sheet Checkered Plate 8011

8011 Aluminum Coil

20mm 30mm 8011 H14 Aluminum Sheet
Uns A98011 Plate Stock
- ASTM B209 Aluminium 8011 Shim Sheet
- 8011 Aluminium Shim Sheet
- ASTM B209 Aluminium 8011 Polished Plates
- 8011 Aluminium Hot Rolled Plates
- ASTM B209 Sheets
- Alloy 8011 Chequered Plate
- 8011 Aluminium Cold Rolled Plates
- 4×8 Aluminium 8011 Sheet
- 8011 Aluminium Corrugated Sheet
- 8011 Aluminium Extruded Sheet
- Aluminium Alloy 8011 Coils
- Hindalco 8011 Aluminium Sheet
- UNS A98011 Sheets Exporter
- Aluminium Alloy 8011 Plates
- Hot Forming 8011 Aluminium Sheet
- Hot Rolled 8011 Aluminium
Aluminium 8011 H18 Plate Specification Table
Specifications Chart | ASTM B209 / ASME SB209 |
Dimension Chart | ASME, ASTM, and API |
Thickness Table in MM | 0.2~300 Milimeter |
Width in mm | 500~2500 Milimeter |
Length in mm | 500~10000 Milimeter |
Tempers | H34, H24, T4, F, T5, H14, H22, H36, H18, H19, T851 T451, H26, T3, T351, H32, H112, H16, O, T7, H321, T651, T6, H111, H12, H38, |
Surface Finish | polished, Bright, hair line, sand blast, brush, checkered, etching, embossed, etc. |
Forms | Foils, Coils, Rolls, Strip, Checkered Plate, Flats, Circle, Blank, Ring (Flange) etc. |
Coating | Color Coated, PVC Coated, Polyester, polyurethane, Fluorocarbon, epoxy coating |
Finishes | Mill, Customer specific finish |
Super strength Al 8011 H18 HR/ CR Plates Stock in India. Buy directly from Aluminium 8011 H14 Properties & Equivalent Material
Aluminium 8011 Plates Equivalent Grades
UNS | EN | DIN,WNr | ISO |
A98011 | EN3982 | 3.4144 | AlZn6CuMgZr |
Aluminium 8011 H14 Properties
Properties | Metric | Imperial |
Density | 2.71 g/cm³ | 0.0979 lb/in³ |
Heat Treatment of 8011 Alloy Chequered Plate
Product Categories | Used Alloy | Thickness(mm) | Width(mm) | Length(mm) | Heat Treatment |
Hot-Rolled Thick plate |
1060/1070/1100 | 8~200 | ≤1350 | ≤9000 | H112 |
3003/3A21 | 8~200 | ≤1350 | |||
6061/6A02 | 8~10 | ≤1250 | |||
5052/5A02 | 8~10 | ≤1250 | |||
10~200 | ≤1350 | ||||
5754 | 8~10 | ≤1200 | |||
10~200 | ≤1350 | ||||
5083 | 8~10 | ≤1000 | |||
10~15 | ≤1250 | ||||
15~200 | ≤1350 | ||||
5A05 | 15~200 | ≤1350 |
Product Categories | Used Alloy | Thickness(mm) | Width(mm) | Volume Weight(t) | Coil Diameter(mm) | Heat Treatment |
Hot-Rolled |
1060/1070/1100 |
7.0~16 |
900 | 4.5 |
505/605 |
F |
1040 | 5.0 | |||||
1080 | 5.0 | |||||
1240 | 6.0 | |||||
1280 | 6.0 | |||||
5052/5A02 |
8.0~10 |
900 | 4.0 | |||
1040 | 5.0 | |||||
1080 | 5.0 | |||||
1240 | 5.5 | |||||
1280 | 5.5 | |||||
5754 |
8~10 |
900 | 4.0 | |||
1040 | 4.5 | |||||
1080 | 4.5 | |||||
1240 | 5.0 | |||||
1280 | 5.0 |
Product Categories | Used Alloy | Thickness(mm) | Width(mm) | Length(mm) | Coil Weight(t) | Heat Treatment |
Cold-Rolled |
1060/1070/1100 |
0.2~3.5 |
≤1340 |
≤6000 |
<6(width:50mm~800mm,thickness:0.2~0.6mm) |
O, H12/22, H14/24, H16/26, H18, H32, H34, H36, H38 |
3003/3A21 | ≤1250 | |||||
3004 | ≤1251 | |||||
5005 | ≤1252 | |||||
6061/6A02 | ≤1253 | |||||
5052/5A02 | ≤1254 | |||||
5754 | ≤1255 | |||||
8011 | ≤1256 |
Best deals to buy bulk UNS A98011 Polished/ Tread Plate cut to size, Check Aluminium 8011 Thermal Conductivity & Price
Aluminium Sheet Grade 8011 Price List
aluminum 8011 sheet with 0.02- 3mm thickness | US $1990-$2990 / Metric Ton |
8011 aluminium checkered sheet | US $1899-$4500 / Ton |
Aluminum foil sheet coils 8011 | US $1600-$2600 / Metric Ton |
8011 H14 H24 aluminum alloy sheet/plate | US $1850-$2500 / Ton |
En3982 Hot Rolled Sheet Weight Table
Thickness Chart in Inches | Density | Plate Weight Chart per Unit Area |
---|---|---|
3/16 | 0.315 lbs/in³8.72 g/cm³ | 0.06000 lbs/in²42.184176 kg/m² |
1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.08 lbs/in²56.245568 kg/m² |
3/8 | 0.315 lbs/in³8.72 g/cm³ | 0.121 lbs/in²85.0714216 kg/m² |
1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.161 lbs/in²113.1942056 kg/m² |
5/8 | 0.315 lbs/in³8.72 g/cm³ | 0.196 lbs/in²137.8016416 kg/m² |
3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.235 lbs/in²165.221356 kg/m² |
7/8 | 0.315 lbs/in³8.72 g/cm³ | 0.274 lbs/in²192.6410704 kg/m² |
1 | 0.315 lbs/in³8.72 g/cm³ | 0.313 lbs/in²220.0607848 kg/m² |
1 1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.391 lbs/in²274.9002136 kg/m² |
1 1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.47 lbs/in²330.442712 kg/m² |
1 3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.549 lbs/in²385.9852104 kg/m² |
2 | 0.315 lbs/in³8.72 g/cm³ | 0.627 lbs/in²440.8246392 kg/m² |
2 1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.705 lbs/in²495.664068 kg/m² |
2 1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.784 lbs/in²551.2065664 kg/m² |
2 3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.862 lbs/in²606.0459952 kg/m² |
3 | 0.315 lbs/in³8.72 g/cm³ | 0.941 lbs/in²661.5884936 kg/m² |
Din 3.4144 Shim Sheet Dimension Chart
Surface finish of Plate | Thickness chart (Milimeter) | Width (Maximum Milimeter) |
---|---|---|
2B – heat treated, Cold rolled, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
2D – heat treated, Cold rolled, pickled Sheet | 0.4–6.35 | 1524 |
2E – heat treated, Cold rolled, mechanically descaled plate | 0.4–8.0 | 2032 |
2R – bright annealed plate, Cold rolled | 0.25–3.5 | 1524 |
brushed, Polished Plate | 0.5–4.0 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Imperial Dimensions
Surface finish of Plate | Gauge chart (Inch) | Width (Maximum Inch) |
---|---|---|
2B – heat treated, Cold rolled, pickled, skin passed Sheet | 10–24 | 72* |
2D – heat treated, Cold rolled, pickled Sheet | 12–24 | 60 |
Polished Sheet (not brushed) | 11–24 | 60 |
BA Mexinox only | 18–28 | 48 |
Temper rolled Sheet Mexinox only | 13–29 | 48 |
If you searching a supplier from these places check our supplies below
8011 Aluminum Coil Hot Rolled Mill Finish Aluminum Coil / Roll Sheet | Norway, Malaysia, Turkey, United Arab Emirates (UAE) |
Aluminum Foils 8011 Cold Rolled Aluminum Coils/sheet | Belgium, Philippines, Dammam -KSA, Indonesia. |
8011 10mm Aluminum Plate | Malaysia, Philippines, Canada, Singapore |
8011 Alloy Aluminum Sheet | Romania, Japan, Europe, Malaysia |
10mm Aluminum Embossed Sheet Checkered Plate 8011 | Sweden, China, Colombia, Malaysia |
8011 Aluminum Coil | Russia, Dubai, Netherlands, Malaysia |
20mm 30mm 8011 H14 Aluminum Sheet | Kuwait, Brazil, South Africa, Saudi Arabia (KSA) |
Aluminium Plate / Sheet/circle 8011 | Australia, Philippines, Nigeria, UK |
50m Length 18 Micr 8011 O Temper Aluminum Foil | Hong Kong, Oman, Malaysia, UAE |
Rolled Alloy H14 8011 0.1mm-5.0mm Aluminum Roofing Coil | Bahrain, Singapore, South Africa |
8011 H14/24 Thin Aluminum Sheet | Europe, France, Thailand, Qatar |
0.21-1mm Thick 8011 H16 Aluminum Alloy Sheet | Malaysia, Germany, Czechia, Thailand |
8011 Aluminum Diamond Plate | USA, Bangladesh, Finland, Malaysia |
Aluminium Alloy Sheet For 8011-h16 | Chile, Singapore, Italy, Iran |
8011 Cold Rolled Smooth Suface Aluminum Alloy Sheet | UK, Mexico, Egypt, Spain |
8011 Temper H24 1.5mm Aluminum Sheet | Poland, Canada, Ellington -United States, UK |
6mm 8011 Aluminum Checkered Plate For Roofing Sheet | Europe, UAE, United Kingdom -UK, Malaysia |