DIN 3.3547 Chequered Plate Gauge Thickness, EN AW-5083 h111 Sheet at reasonable price in Mumbai
5083 Aluminum Plate
EN AW-5083 h111 Foil
5083 Aluminum Sheet
Aluminum alloys generally tend to exhibit excellent to moderate corrosion resistance properties. This property in particular concerns its use in the marine environment. Take, for instance, the 5083 Aluminum Plate, which is seen in the Shipbuilding business. The excellent corrosion resistance properties make it resistant to high saline bodies. With inclusions of magnesium and trace contents of manganese along with chromium, the 5083 Cast Aluminum Plate is an alloy exhibits that high strength properties. The corrosion resistance properties of this material also extend to the chemical processing industry, where the 5083 Aluminum Sheet is highly resistant to attack by harsh reagents used in the factories. Tempering is useful in increasing the strength of the alloy. Some of the tempers used on the 5083 Aluminium Plate include O, H111, and H32. Due to its high strength, the machinability of this alloy is known to be poor. But the weldability offered by the alloy is very good. In fact, the Aluminium Tooling Plate 5083 has the ability to retain its exception strength properties even after undergoing welding operations. The alloy exhibits the highest strength amongst the non-heat treatable alloys. Yet, 5083 Aluminum Sheet Suppliers do not recommend using this alloy in environments where the temperatures would exceed 65°C.
Check the Market price before you buy ASTM B209 5083 Aluminum Sheet Cut To Size, We provide Aluminium Tooling Plate 5083 Stock with instant delivery
5083-h116 Aluminum Sheet Chemical Structure
| Element | % Present |
|---|---|
| Si | 0.4 |
| Fe | 0.4 |
| Cu | 0.1 |
| Mn | 0.4-1.0 |
| Mg | 4.0-4.9 |
| Zn | 0.25 |
| Ti | 0.15 |
| Cr | 0.05-0.25 |
| Al | Balance |
Mechanical Properties of 5083-h32 Aluminum Sheet
| BS EN 485-2:2008 Sheet 0.2 - 6.3mm Thick |
|
|---|---|
| Property | Value |
| Proof Stress | 125 Min MPa |
| Tensile Strength | 275 - 350 MPa |
| Hardness Brinell | 75 HB |
| BS EN 485-2:2008 Plate 6.3mm to 80mm |
|
|---|---|
| Property | Value |
| Proof Stress | 115 Min MPa |
| Tensile Strength | 270 - 345 MPa |
| Hardness Brinell | 75 HB |
| BS EN 485-2:2008 Plate 80mm to 120mm |
|
|---|---|
| Property | Value |
| Proof Stress | 110 Min MPa |
| Tensile Strength | 260 Min MPa |
| Hardness Brinell | 70 HB |
| Elongation A | 12 Min % |
| BS EN 485-2:2008 Sheet 0.2mm to 6.00mm |
|
|---|---|
| Property | Value |
| Proof Stress | 215 Min MPa |
| Tensile Strength | 305 - 380 MPa |
| Hardness Brinell | 89 HB |
We Keep bulk stock of Aluminium 5083 Hot Rolled Sheets Price, 5083 H111 Foil Stock, En Aw-5083 Shim Sheet in Mumbai
Types of Grade 5083 Perforated Sheet
H111 5083 Alloy Aluminum Plate Sheet
5083 Aluminum Roofing Sheet
Aluminium Alloy 5083 Sheet Plate
Alloy 5083 H111 Aluminum Sheet
Aluminum Sheet 5083 O H116
Aluminum Sheet 3mm Thick 5083
6mm Aluminium Alloy Plate 5083
2mm 3mm 4mm 7075 T6 5083 Aluminium Sheet
Aluminium Plate 5083 H111 Fabrication
| Process | Rating |
|---|---|
| Workability – Cold | Average |
| Machinability | Poor |
| Weldability – Gas | Average |
| Weldability – Arc | Excellent |
| Weldability – Resistance | Excellent |
| Brazability | Poor |
| Solderability | Poor |
Density of A95083 HR Plates
| Property | Value |
|---|---|
| Density | 2650 kg/m3 |
5083 Aluminium Tooling Plate Melting Temperature
| Property | Value |
|---|---|
| Melting Point | 570°C |
Aluminium Plate 5083 H321 Uses
- Shipbuilding
- Rail cars
- Vehicle bodies
- Tip truck bodies
- Mine skips and cages
- Pressure vessels
View Available sizes of En Aw-5083 Cold Rolled Plate, EN AW-AlMg4,5Mn0,7 Circle, View UNS A95083 Perforated and Flat Sheet Specification
5083 Aluminium Plate Specification
| Specifications Chart | ASTM B209 / ASME SB209 |
| Dimension Chart | ASME, ASTM, and API |
| Thickness Table in MM | 0.2~300 Milimeter |
| Width in mm | 500~2500 Milimeter |
| Length in mm | 500~10000 Milimeter |
| Tempers | H34, H24, T4, F, T5, H14, H22, H36, H18, H19, T851 T451, H26, T3, T351, H32, H112, H16, O, T7, H321, T651, T6, H111, H12, H38, |
| Surface Finish | polished, Bright, hair line, sand blast, brush, checkered, etching, embossed, etc. |
| Forms | Foils, Coils, Rolls, Strip, Checkered Plate, Flats, Circle, Blank, Ring (Flange) etc. |
| Coating | Color Coated, PVC Coated, Polyester, polyurethane, Fluorocarbon, epoxy coating |
| Finishes | Mill, Customer specific finish |
Aluminium Strip 5083 Thermal Expansion
| Property | Value |
|---|---|
| Thermal Conductivity | 121 W/m.K |
| Thermal Expansion | 25 x 10-6/K |
Electrical properties of Al 5083 Plate
| Property | Value |
|---|---|
| Modulus of Elasticity | 72 GPa |
| Electrical Resistivity | 0.58 x 10-6 Ω.m |
Din 3.3547 Checkered Plates Equivalents
| European Standard | OLD | WNr | UNS | ISO | USA (AA) | GERMANY (DIN) |
| AW-AlMg4,5Mn0,7 | AG4,5MC | 3.3547 | A95083 | AlMg4,5Mn0,7 | 5083 | AlMg4,5Mn |
Features of En Aw-almg4,5mn0,7 Cold Rolled Sheets
- High strength
- Corrosion resistance
- Machinability
5083 Aluminum Plate Thickness Tolerance
| 5083 Aluminium Sheets Product Range | ||||
|---|---|---|---|---|
| Alloy No. | Thickness (mm) |
Width (mm) |
Length (mm) |
Temper |
| A1050, A1060, A1070, A1100 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
| A3003, A3105, A3004 | 0.2-5.0 | 20-2200 | 20-8000 | O, H14, H18, H24 |
| A5052, A5005, A5083, A5086, A5754 | 0.2-5.0 | 20-2200 | 20-8000 | O, H18, H24, H32, H34, H111, H112 |
| A6061, A6082, A6063 | 0.2-5.0 | 20-2200 | 20-8000 | T4, T6, T651 |
| A8011 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
5083 Aluminium Sheet Sizes
SIZES |
KG/Metre | Availability | |
|---|---|---|---|
| 0.5mm | x | x | 1.355 |
| 1.0mm | x | x | 2.710 |
| 1.2mm | x | x | 3.252 |
| 1.5mm | x | x | 4.065 |
| 2.0mm | x | x | 5.420 |
| 2.5mm | x | x | 6.775 |
| 3.0mm | x | x | 8.130 |
One of India's largest supplier of En Aw 5083 H321/ H112 Coil, Aluminium 5083 Polished Plate, DIN 3.3547 Diamond Plates Weight Chart
Astm B209 5083 Aluminum Plate Weight
| Thickness Chart in Inches | Density | Plate Weight Chart per Unit Area |
|---|---|---|
| 3/16 | 0.315 lbs/in³8.72 g/cm³ | 0.06000 lbs/in²42.184176 kg/m² |
| 1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.08 lbs/in²56.245568 kg/m² |
| 3/8 | 0.315 lbs/in³8.72 g/cm³ | 0.121 lbs/in²85.0714216 kg/m² |
| 1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.161 lbs/in²113.1942056 kg/m² |
| 5/8 | 0.315 lbs/in³8.72 g/cm³ | 0.196 lbs/in²137.8016416 kg/m² |
| 3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.235 lbs/in²165.221356 kg/m² |
| 7/8 | 0.315 lbs/in³8.72 g/cm³ | 0.274 lbs/in²192.6410704 kg/m² |
| 1 | 0.315 lbs/in³8.72 g/cm³ | 0.313 lbs/in²220.0607848 kg/m² |
| 1 1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.391 lbs/in²274.9002136 kg/m² |
| 1 1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.47 lbs/in²330.442712 kg/m² |
| 1 3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.549 lbs/in²385.9852104 kg/m² |
| 2 | 0.315 lbs/in³8.72 g/cm³ | 0.627 lbs/in²440.8246392 kg/m² |
| 2 1/4 | 0.315 lbs/in³8.72 g/cm³ | 0.705 lbs/in²495.664068 kg/m² |
| 2 1/2 | 0.315 lbs/in³8.72 g/cm³ | 0.784 lbs/in²551.2065664 kg/m² |
| 2 3/4 | 0.315 lbs/in³8.72 g/cm³ | 0.862 lbs/in²606.0459952 kg/m² |
| 3 | 0.315 lbs/in³8.72 g/cm³ | 0.941 lbs/in²661.5884936 kg/m² |
5083 Cast Aluminum Plate Dimension
| Surface finish of Plate | Thickness chart (Milimeter) | Width (Maximum Milimeter) |
|---|---|---|
| 2B – heat treated, Cold rolled, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2D – heat treated, Cold rolled, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – heat treated, Cold rolled, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – bright annealed plate, Cold rolled | 0.25–3.5 | 1524 |
| brushed, Polished Plate | 0.5–4.0 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
Imperial Dimensions
| Surface finish of Plate | Gauge chart (Inch) | Width (Maximum Inch) |
|---|---|---|
| 2B – heat treated, Cold rolled, pickled, skin passed Sheet | 10–24 | 72* |
| 2D – heat treated, Cold rolled, pickled Sheet | 12–24 | 60 |
| Polished Sheet (not brushed) | 11–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Temper rolled Sheet Mexinox only | 13–29 | 48 |
5083 Aluminium Plate Price
| 5083 T6 Aluminum sheet price | 5083 Aluminium Plate Prices |
| 5083 t6 aluminium metal sheet | US $1500-$2500 / Ton |
| 10mm 5083 t6 aluminum plate sheet | US $2900-$4750 / Ton |
| 5083 price of aluminium roofing sheet | US $2100-$2999 / Ton |
| 5083 3mm aluminium plain sheets | US $2000-$2300 / Metric Ton |
You can check our associates and dealers at different part of world
| 6mm Aluminium Alloy Plate 5083 | United Kingdom -UK, Malaysia, Europe, UAE |
| 2mm 3mm 4mm 7075 T6 5083 Aluminium Sheet | Dammam -KSA, Belgium, Philippines, Indonesia. |
| 5083 Aluminum Shim Sheet 2mm 3mm 4mm | Qatar, Thailand, Europe, France. |
| 5083 Aluminum 4ft*8ft Sheets | Malaysia, Thailand, Germany, Czechia |
| Rolled Aluminium Sheets/ Chequered Aluminum Plate 5083 T6 T651 | Finland, Bangladesh, Malaysia, USA |
| 5083 Aluminium Checker Plate Sheet 3mm Thick | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |
| 5083 H111 H112 H321 Aluminium Alloy Sheet Astm B209 | South Africa, Bahrain, Singapore, Singapore |
| 0.5mm Thick Aluminum Sheet 5083 H116 | Philippines, UK, Australia, Nigeria |
| 5083 Embossed Aluminum Sheet | Oman, UAE, Hong Kong, Malaysia |
| 5083 Aluminum Checkered Plate 8mm Aluminum Sheet | Chile, Singapore, Iran, Italy |
| 5083 H112 Aluminium Sheet | United Arab Emirates (UAE), Norway, Turkey, Malaysia |
| 5083 H111 H112 H321 Aluminium Alloy Sheet | Netherlands, Russia, Malaysia, Dubai |
| 5083 0.2mm 0.6mm Aluminium Perforated Sheet | Egypt, UK, Mexico, Spain |
| Aluminium Plate 5083 Sheet | UK, Ellington -United States, Poland, Canada |
| 5083 H11 24 Swg Aluminium Sheet | Canada, Malaysia, Philippines, Singapore |
| 5083 1.5mm Anodized Aluminum Sheet | Japan, Romania, Europe, Malaysia |
| 5083 Aluminum Checkered Plate | Sweden, China, Malaysia, Colombia |