EN19 Round Bar

  • Home
  • EN19 Round Bar

Custom Sizes BS970 709m40 Steel Rod and EN19 Steel Bar Manufacturer In India


EN19 Round Bar

EN19 Round Bar

BS970 709m40 Steel Rod

BS970 709m40 Steel Rod

EN19 Steel Bar

EN19 Steel Bar

Engineering steels are useful in multiple applications, especially since they contain several important characteristics. Classified as low alloy steel, the EN19 Round Bar  is referred to as engineering steel because the material has found its way into many mechanical engineering applications. The material could be produced under different standards to meet the requirement of the buyers including the various EN19 Flat Bar Sizes  required. As low alloy steel, the chemical contents of this material consist of the additions of both chromium and molybdenum. These two elements make the EN19 Hollow Bar  suited to fit many engineering applications as a high-quality alloy. Primarily the main use of this alloy is because of its high fatigue strength. Applications in engineering may have their equipment set in motion. Due to this, the external forces, including air or pressure may cause fatigue to steels that do not have good resistance to fatigue as well as and shock resistance. Yet the exemplary performance of the EN19 Bright Bar  is not complete without mention of properties such as high toughness, and good torsion strength in engineering applications. As a high quality alloy steel, the EN19 Square Bar  also has properties such as resistance to abrasion & impact resistance. Any Round Bar EN 19 Manufacturer  would recommend using this alloy because the material, like most conventional steels, can be heat treated. It is possible to treat the alloy in numerous ways in order to achieve a combination of properties.

Supplier Of EN19 Bright/ Hex/ Flat Bar In Mumbai, We Stock And Supply At Lowest Price In Mumbai

Table of Content


We Help You To Save Your Cost By Providing Exact Size Of EN-19 CS Square Bar and en19 round bar suppliers in India

EN19 Bar Sizes

Hot Rolled En19 Rounds
Size (mm) 40 50 60 70 75 80 85 90 95 100 105 110
115 120 125 130 140 150 160 170 180 190 200 220
240 260 280 300 320 350 400
Hexagons Bright Drawn EN19
Size
(ins A/F) 		0.500 0.600 0.625 0.750 0.937 1.010 1.125 1.300 1.500
Size
(mm A/F) 		10 12 15 16 18 20 25 30 35 40 45 50 60
Bright Drawn EN19 Rounds
Size (inches) 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 15/16 1 1 1/8 1 1/4 1 3/8 1 1/2
1 5/8 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/2 4
Size (mm) 10 12 15 16 18 20 25 30 35 40 45 50 60

Carbon Bars EN-19 Round Bar Types

4mm 5mm Round Bar En19

4mm 5mm Round Bar En19

Carbon Steel Solid Round Bars En19

Carbon Steel Solid Round Bars En19

Bright Round Bar En19 40mm 60mm Steel Solid Round Bar

Bright Round Bar En19 40mm 60mm Steel Solid Round Bar

Forged Alloy Round Steel Bar En24 En19

Forged Alloy Round Steel Bar En24 En19

En19 Cold Drawn Steel Round Bar

En19 Cold Drawn Steel Round Bar

En19 Steel Round Bar

En19 Steel Round Bar

Hot Rolled Ck55 En19 Round Bars

Hot Rolled Ck55 En19 Round Bars

Hot Rolled 2b En19 Gi Square Bar

Hot Rolled 2b En19 Gi Square Bar

Specification Of EN19 Round Bars

Grade en19
Specification BS 970 1955 EN
Round bar size Diameter: 3-~800mm
Hex Bar size 2-100mm A/F
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Square bar size 4 to 100mm
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Section 3.0 to 12.0mm thickness
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Billet Size 1/2″ to 495mm Diameter
Rectangles Size 33 x 30mm to 295 x 1066mm
Finish Cold (bright) drawn, centreless ground,smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Condition Hardened & tempered, annealed
Technique en19 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Processing Bar cutting to 650mm
Form en19 Welding Rod, Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.
Check Weight, Size Chart And Price List Of 709M40T Hot and Cold Rolled Bar, Check en19 condition t equivalent properties

EN19 Welding Rod Equivalent

Standard CS EN-19
UNS –
WERKSTOFF NR. 42Cr4Mo2
BS 709M40
IS 40Cr4Mo3
JIS –
EN EN19
SAE/AISI 4140,4142

EN19 Steel Round Bar Standards

Country USA German British Japan China Australia
Standard ASTM A29 DIN 17200 BS 970 JIS G4105 GB/T 3077 AS 1444
Grades 4140 1.7225/
42crmo4 		42CrMo4 SCM440 42CrMo 4140

Alloy Steel EN19 Material Hardness

Properties Metric Imperial
Hardness, Brinell 197 197

Engineering Steel EN19 Density

DENSITY (G/CM 3) 8.08
DENSITY (LB/IN 3) 0.292

EN19 Melting Point

MELTING POINT (°C) 1425
MELTING POINT (°F) 2600

EN19 Round Bar Chemical Composition

Grade Mn Si C Cr P Ni S Mo
EN – 19 .50 – .80 .10 – .35 .35 – .45 .90 – 1.40 .040 – .040 .20 – .40

Cs EN19 Rod Mechanical Properties

Annealed R S T U V W Y
Ruling Section (mm) 150 150 100 65 65 30 30 25
Tensile Strength (MPa) 680/720 690/850 770/930 850/1000 930/1080 1000/1160 1080/1240 1280
Yield Stress (MPa) 440/480 480 570 665 740 835 895 1050
Elongation (% Min) 22 15 15 13 12 12 10 10
ISO V Impact (Joule) 30 30 30 30 25 25 22 7
Hardness (Brinell) 190/210 201/255 223/277 248/302 269/321 293/341 311/375 363/415
Proof Stress (0.2%) if required (MPa, Min) 495 550 630 710 770 850 985

EN19 Round Bar Price In India

en19 round bar price in india Price Per Unit (INR)
steel round bar en19 US$ 400.00-US$ 900.00 / Metric Ton
ansi 25mm 316 stainless steel en19 round bar US$ 2,000.00-US$ 3,500.00 / Ton
en19 price round steel bar US$ 1,200.00-US$ 3,000.00 / Ton
dia 8mm 15mm 35mm 55mm 100mm en19 bright bar US$ 2,000.00-US$ 7,999.00 / Ton

EN19 Square Bar Sizes

Size Chart in Milimeter Weight Chart per Meter (Kilogram) Size Chart in Milimeter Weight Chart per Meter (Kilogram)
12 x 12 1.14 30x30 7.11
16 x 16 2.02 40 x 40 12.60
20 x 20 3.16 50 x 50 19.80
25 x 25 4.94
Carbon Steel EN19 Bar In Cut To Sizes, Supplier Of Carbon Steel EN-19 Black and Polished Bars As Per International Standard

Sizing Of Carbon Steel EN19 Hex Bar

Size Chart in Milimeter Weight Chart (Kilogram/meter) Size Chart in Milimeter Weight Chart (Kilogram/meter) Size Chart in Milimeter Weight Chart (Kilogram/meter)
7 x 7 0.337 19 x 19 2.479 38 x 38 9.916
8 x 8 0.44 20 x 20 2.747 40 x 40 10.988
9 x 9 0.556 21 x 21 3.029 42 x 42 12.114
10 x 10 0.687 22 x 22 3.324 45 x 45 13.906
11 x 11 0.831 24 x 24 3.956 48 x 48 15.822
12 x 12 0.989 25 x 25 4.292 50 x 50 17.168
13 x 13 1.161 26 x 26 4.642 53 x 53 19.29
14 x 14 1.346 28 x 28 5.384 55 x 55 20.774
15 x 15 1.545 30 x 30 6.181 60 x 60 24.723
16 x 16 1.758 32 x 32 7.032 65 x 65 29.015
17 x 17 1.985 34 x 34 7.939 70 x 70 33.65
18 x 18 2.225 36 x 36 8.9 75 x 75 38.629

EN19 Flat Bar Sizes

Sizes Chart in Milimeter Sizes in Inch Thickness Chart In MM Thickness Chart In Inches
22 7/8 17 & 18 2/3 - 5/7
25 1 5 to 20 3/16 - 4/5
30 1-3/16 5 to 20 3/16 - 4/5
32 1-1/4 6 to 20 1/4 - 4/5
35 1-3/8 5 to 20 3/16 - 3/16
40 1-4/7 5 to 25 3/16 - 1
45 1-7/9 5 to 25 3/16 - 1
47 1-6/7 17,25 & 32 2/3, 1 & 1-1/4
50 2 5 to 32 3/16 - 1-1/4
55 2-1/16 5 to 25 3/16 - 1
57 2-1/4 32 1-1/4
60 2-3/8 5 to 35 3/16 - 1-3/8
63 2-1/2 10 to 30 3/8 - 1-3/16
65 2-5/9 10 to 30 & 35 3/8 - 1-3/16, & 1-3/8
70 2-3/4 6 to 25 & 40 1/4 - 1, & 1-4/7
75 3 8 to 25 5/16 - 1
80 3-1/8 8 to 20 5/16 - 4/5
90 3-1/2 8 to 20 5/16- 4/5
100 4 8, 10, 12 5/16, 3/8, 1/2

Size Chart Of EN19 Hollow Bar

Size Table in MM Chucked true to Outside Dia in MM Chucked true to Inside Dia in MM and Inch
Outside Dia,
Milimeter 		Inside Dia,
Milimeter 		Maximum Outside Dia,
Milimeter 		Minimum. Inside Dia,
Milimeter 		Maximum Outside Dia,
Inches. 		Minimum. Inside Dia,
Inches 		Maximum Outside Dia,
Milimeter 		Minimum. Inside Dia,
Milimeter 		Maximum Outside Dia,
Inches 		Minimum. Inside Dia,
Inches
32 20 31 21.9 1.220 0.862 30 21 1.185 0.827
32 16 31 18 1.220 0.709 30 17 1.181 0.669
36 25 35 26.9 1.378 1.059 34.1 26 1.343 1.024
36 20 35 22 1.378 0.866 34 21 1.339 0.827
36 16 35 18.1 1.378 0.713 33.9 17 1.335 0.669
40 28 39 29.9 1.535 1.177 38.1 29 1.500 1.142
40 25 39 27 1.535 1.063 38 26 1.496 1.024
40 20 39 22.1 1.535 0.870 37.9 21 1.492 0.827
45 32 44 33.9 1.732 1.335 43.1 33 1.697 1.299
45 28 44 30 1.732 1.181 43 29 1.693 1.142
45 20 44 22.2 1.732 0.874 42.8 21 1.685 0.827
50 36 49 38 1.929 1.496 48 37 1.890 1.457
50 32 49 34.1 1.929 1.343 47.9 33 1.886 1.299
50 25 49 27.2 1.929 1.071 47.8 26 1.882 1.024
56 40 55 42 2.165 1.654 54 41 2.126 1.614
56 36 55 38.1 2.165 1.500 53.9 37 2.122 1.457
56 28 55 30.3 2.165 1.193 53.7 29 2.114 1.142
63 50 62 51.9 2.441 2.043 61.1 51 2.406 2.008
63 45 62 47 2.441 1.850 61 46 2.402 1.811
63 40 62 42.2 2.441 1.661 60.8 41 2.394 1.614
63 36 62 38.3 2.441 1.508 60.7 37 2.390 1.457
63 32 62 34.4 2.441 1.354 60.6 33 2.386 1.299
71 56 69.9 58 2.752 2.283 68.9 57 2.713 2.244
71 45 69.9 47.3 2.752 1.862 68.6 46 2.701 1.811
71 40 69.9 42.4 2.752 1.669 68.5 41 2.697 1.614
71 36 69.9 38.5 2.752 1.516 68.4 37 2.693 1.457
75 60 73.8 62 2.906 2.441 72.8 61 2.866 2.402
75 50 73.8 52.2 2.906 2.055 72.6 51 2.858 2.008
75 40 73.8 42.5 2.906 1.673 72.3 41 2.846 1.614
80 63 78.8 65 3.102 2.559 77.8 64 3.063 2.520
80 50 78.8 52.4 3.102 2.053 77.4 51 3.047 2.008
80 45 78.8 47.5 3.102 1.870 77.3 46 3.043 1.811
80 40 78.8 42.6 3.102 1.677 77.2 41 3.039 1.614
85 67 83.7 69.1 3.295 2.720 82.6 68 3.252 2.677
85 55 83.7 57.4 3.295 2.260 82.3 56.0 3.240 2.205
85 45 83.7 47.6 3.295 1.874 82.1 46.0 3.232 1.811
90 71 88.6 73.1 3.488 2.878 87.6 72.1 3.449 2.839
90 63 88.6 65.3 3.488 2.571 87.3 64.0 3.437 2.520
90 56 88.6 58.5 3.488 2.303 87.1 57.0 3.429 2.244
90 50 88.6 52.6 3.488 2.071 87.0 51.0 3.425 2.008
95 75 93.5 77.3 3.681 3.041 92.4 76.2 3.641 2.997
95 67 93.5 69.3 3.681 2.728 92.2 68.0 3.630 2.677
95 50 93.5 52.7 3.681 2.075 91.8 51.0 3.614 2.008
100 80 98.5 82.3 3.878 3.240 97.4 81.2 3.835 3.197
100 71 98.5 73.4 3.878 2.890 97.2 72.1 3.827 2.839
100 63 98.5 65.5 3.878 2.579 97.0 64.0 3.819 2.520
100 56 98.5 58.7 3.878 2.311 96.8 57.0 3.811 2.244
106 80 104.4 82.5 4.110 3.248 103.1 81.2 4.059 3.197
106 71 104.4 73.5 4.110 2.894 103.0 72.1 4.055 2.839
106 63 104.4 65.7 4.110 2.587 102.7 64.0 4.043 2.520
106 56 104.4 58.9 4.110 2.319 102.5 57.0 4.035 2.244
112 90 110.3 92.5 4.343 3.642 109.2 91.4 4.299 3.598
112 80 110.3 82.6 4.343 3.252 108.9 81.2 4.287 3.197
112 71 110.3 73.7 4.343 2.902 108.7 72.1 4.280 2.839
112 63 110.3 65.8 4.343 2.591 108.5 64.0 4.272 2.520
118 90 116.2 92.7 4.575 3.650 114.9 91.4 4.524 3.598
118 80 116.2 82.8 4.575 3.260 114.6 81.2 4.512 3.197
118 71 116.2 73.8 4.575 2.906 114.5 72.1 4.508 2.839
118 63 116.2 66.0 4.575 2.598 114.2 64.0 4.496 2.520
125 100 123.1 102.7 4.846 4.043 121.9 101.5 4.799 3.996
125 90 123.1 92.8 4.846 3.654 121.7 91.4 4.791 3.598
125 80 123.1 82.9 4.846 3.264 121.4 81.2 4.780 3.197
125 71 123.1 74.0 4.846 2.913 121.3 72.1 4.772 2.839
132 106 130.0 108.8 5.118 4.283 128.8 107.6 5.071 4.236
132 90 130.0 93.0 5.118 3.661 128.4 91.4 5.055 3.598
132 80 130.0 83.1 5.118 3.272 128.1 81.2 5.043 3.197
132 71 130.0 74.2 5.118 2.921 121.2 72.1 5.035 2.839
140 112 137.9 115 5.429 4.528 136.6 113.7 5.378 4.476
140 100 137.9 103.1 5.429 4.059 136.3 101.5 5.366 3.996
140 90 137.9 93.2 5.429 3.669 136.1 91.4 5.358 3.598
140 80 137.9 83.3 5.429 3.280 135.8 81.2 5.346 3.197
150 125 147.7 128.1 5.815 5.043 146.5 126.9 5.768 4.996
150 106 147.7 109.3 5.815 4.303 146 107.6 5.748 4.236
150 95 147.7 98.4 5.815 3.874 145.7 96.4 5.736 3.795
150 80 147.7 83.6 5.815 3.291 145.3 81.2 5.720 3.197
160 132 157.6 135.3 6.205 5.327 156.3 134 6.154 5.276
160 122 157.6 125.4 6.205 4.937 156 123.8 6.142 4.874

Hot Rolled EN19 Tempering Chart

Temp. Range °C 20-100 20-200 20-400 20-600
Coefficient 12.2 12.6 13.7 14.6

Jis EN19 Forging

En19 steel is forged at 926 to 1205°C.

Din 42cr4mo2 Black Bars Normalizing

Heat 870°C – 900°C and cool in still air.

EN19 Steel Machinability

Properties Metric Imperial
Machinability (based on AISI 1212 as 100 machinability) 65 65

Aisi EN-19 Bars Poisson’s Ratio

Properties Metric Imperial
Poisson’s ratio 0.27-0.30 0.27-0.30

EN19 Bright Bar Elastic Properties

Properties Metric Imperial
Elastic modulus 190-210 GPa 27557-30458 ksi

80% repeat orders from below countries

4mm 5mm Round bars EN19 South Africa, Bahrain, Singapore
carbon steel solid round bars 709m40 France, Thailand, Europe, Qatar
bright round bars en19 40mm 60mm steel solid round bars Philippines, Nigeria, Australia, UK
Forged Alloy Round Steel bars 709m40 Oman, Malaysia, Hong Kong, UAE
En19 Cold Drawn Steel Round bars Finland, Malaysia, USA, Bangladesh
709m40 steel round bars Italy, Iran, Chile, Singapore
Hot Rolled CK55 EN19 Round Bars United Arab Emirates (UAE), Norway, Malaysia, Turkey
Hot rolled 2b en19 gi square bars Dammam -KSA, Indonesia, Belgium, Philippines.
709m40 High Tensile Strengthen Steel Round bars Canada, Singapore, Malaysia, Philippines
38*38 EN19 cold drawn square steel bars Egypt, Spain, UK, Mexico
hot rolled alloy round bars en19 Ellington -United States, Poland, Canada, UK
Forged steel round bars 709m40 United Kingdom -UK, Europe, UAE, Malaysia
EN19 Cold Drawn Surface Bright Steel Square Bars Japan, Europe, Romania, Malaysia
6mm 8mm en19 material steel round bars Germany, Czechia, Malaysia, Thailand

Steel Round Bar

Products

EN19 Round Bar Manufacturers in India

Call us

+91 22 66595934