EN24t Steel Rod Manufacturer In India, View UNS 817m40 Hex/ Flat Bar Size And Price List In Mumbai
EN24 Round Bar
EN24t Steel Rod
817m40 EN24 Flat Bar
Heat treatments are an essential part of making steel. This is because steel alloys gain an advantage over their non-treated counterparts. Many treated alloys such as the EN24 Round Bar are delivered to their buyers in hardened and tempered conditions. These heat treatments in combination with the elements in the chemical composition of the product give the EN24 Round Bar Material Properties a boost. In the case of this alloy, tempering in combination with the addition of nickel and molybdenum improves the wear resistance of the Aisi 4340 EN24t Rod . This material has been classified as a very high strength steel alloy. The higher tensile strength EN24t Bar Properties is a result of alloying nickel with both chromium and molybdenum. In fact, it is this elemental combination that offers several alloys including the Alloy Steel EN24 Flat Bar many of its unique properties. Apart from being a very high tensile steel strength, with superior wear resistance properties, the content of nickel added in EN24 Square Bar gives it good ductility. Furthermore, the material performs well in low temperature environments where it exhibits relatively good impact properties. Available in different Afron 35ncd6 EN24t Round Bar Sizes , the use of these bars is not limited to only low or ambient temperatures. Its higher tensile strength also makes it suited to those applications where elevated temperatures are a common occurrence.
EN24 Bright Bar Suppliers In Mumbai, Buy EN24t Round Bar, Make An Inquiry For CS EN24t Bar
EN24 Round Bar Material Properties
| Condition | TensileN/mm² | YieldN/mm² | Elongation% | IzodKCV J | HardnessBrinell |
| T | 850-1000 | 650 | 13 | 35 | 248-302 |
| U | 925-1000 | 755 | 12 | 42 | 269-331 |
| V | 1000-1150 | 850 | 12 | 42 | 293-352 |
| W | 1075-1225 | 940 | 11 | 35 | 311-375 |
| X | 1150-1300 | 1020 | 10 | 28 | 341-401 |
| Y | 1225-1375 | 1095 | 10 | 21 | 363-429 |
| Z | 1550 | 1235 | 5 | 9 | 444 |
EN24t Bar Properties
| C | P | Mo | Mn | S | Cr | Si | Ni | |
| EN - 24 | .35 - .45 | .040 | .20 - .40 | .45 - .70 | .040 | .90 - 1.40 | .10 - .35 | 1.30 - 1.80 |
buy directly from manufacturer of UNS 817m40t Square Bars and Carbon Steel EN24 Rod online and save cost, check Size chart
EN24 Bar Sizes
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
| Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
| Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
| Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Alloy Steel EN24 Flat Bar Types
Alloy Steel 1.6582 34crnimo6 En24 Round Bar
Hot Rolled Round Bar En24
Forged Steel Bar En24
En24 Steel Round Bar
En24 Forged Steel Round Bar
140mm En24 Ms Steel Round Bar
En24 Sae4340 40crnimo Alloy Steel Round Bar
Length: 3-6 Meter En24 Forged Steel Round Bar
Uses of EN24 Bright Bar
- High strength shafts
- Punches & dies
- Drill bushings
- Retaining rings
- Gears
Uns 817m40 EN24 Hex Bar Thermal Properties
| Thermal conductivity at °C | W/(m*k) |
| 40.5 | 20 |
| 32.5 | 350 |
| 25.5 | 700 |
Equivalent of EN24 Welding Rod
| BS970: 1955 | EN24 / EN24T |
| BS970/PD970: 1970 onwards | 817M40 / 817M40T |
| European | 34CrNiMo6 |
| Werkstoff No. | 1.6582 |
| US SAE (AISI) | 4340 |
| Din | 40NiCrMo84 |
| French AFNOR | 35NCD6 |
| European Standard | EN10277-5 |
| SAE (AISI) | 9850 |
| Werkstoff No. | 1.6565 |
We Can Supply EN-24 CS Polished/ Black Bar With Customized Thickness And Diameter, View Weight Chart of EN24 Bar
Sae 9850 Hot Rolled Round Bars Spec Chart
| Grade | EN-24 Round Bars |
|---|---|
| EN 24 Square bars size | 4 to 100mm |
| EN-24 CS Hollow Bars | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Carbon Steel EN-24 Hex Bars size | 2-100mm A/F |
| EN 24 Angle bars size | 3mm*20mm*20mm~12mm*100mm*100mm |
| EN-24 CS Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Carbon Steel EN-24 Flat bars size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| EN 24 Channel Bars | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| EN-24 CS Section | 3.0 to 12.0mm thickness |
| Carbon Steel EN-24 Round bars size | Diameter: 3-~800mm |
| EN 24 Billet Size | 1/2" to 495mm Diameter |
| EN-24 CS Round Bar Standard Dimensions | Diameter / Height: EN 24 Rod and Bar Sizes : 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches. |
| EN 24 Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| EN-24 CS Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Carbon Steel EN-24 Technique | EN 24 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| EN 24 Condition | Hardened & tempered, annealed |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Form | EN 24 Round, Rod, T-Bar, EN 24 Channel Bar, Precision Ground Bar, EN 24 Flat Bar, EN 24 Square Bar, EN 24 Blocks, EN 24 Round Rod, EN 24 Rings, EN 24 Hollow, EN 24 Triangle, Rectangle, Hex (A/F), EN 24 Threaded, Half Round Bar, Profiles, EN 24 Billet, EN 24 Ingot, I/H Bar, Forging etc. |
| Processing | Bar cutting to 650mm |
| Our EN 24 Round bar conforms to NACE MR0175/ISO 15156 | |
Size of EN24 Square Bar in MM
| Size Chart in Milimeter | Weight Chart per Meter (Kilogram) | Size Chart in Milimeter | Weight Chart per Meter (Kilogram) |
|---|---|---|---|
| 12 x 12 | 1.14 | 30x30 | 7.11 |
| 16 x 16 | 2.02 | 40 x 40 | 12.60 |
| 20 x 20 | 3.16 | 50 x 50 | 19.80 |
| 25 x 25 | 4.94 |
Alloy Steel EN24T Flat Bar Sizes
| Sizes Chart in Milimeter | Sizes in Inch | Thickness Chart In MM | Thickness Chart In Inches |
|---|---|---|---|
| 22 | 7/8 | 17 & 18 | 2/3 - 5/7 |
| 25 | 1 | 5 to 20 | 3/16 - 4/5 |
| 30 | 1-3/16 | 5 to 20 | 3/16 - 4/5 |
| 32 | 1-1/4 | 6 to 20 | 1/4 - 4/5 |
| 35 | 1-3/8 | 5 to 20 | 3/16 - 3/16 |
| 40 | 1-4/7 | 5 to 25 | 3/16 - 1 |
| 45 | 1-7/9 | 5 to 25 | 3/16 - 1 |
| 47 | 1-6/7 | 17,25 & 32 | 2/3, 1 & 1-1/4 |
| 50 | 2 | 5 to 32 | 3/16 - 1-1/4 |
| 55 | 2-1/16 | 5 to 25 | 3/16 - 1 |
| 57 | 2-1/4 | 32 | 1-1/4 |
| 60 | 2-3/8 | 5 to 35 | 3/16 - 1-3/8 |
| 63 | 2-1/2 | 10 to 30 | 3/8 - 1-3/16 |
| 65 | 2-5/9 | 10 to 30 & 35 | 3/8 - 1-3/16, & 1-3/8 |
| 70 | 2-3/4 | 6 to 25 & 40 | 1/4 - 1, & 1-4/7 |
| 75 | 3 | 8 to 25 | 5/16 - 1 |
| 80 | 3-1/8 | 8 to 20 | 5/16 - 4/5 |
| 90 | 3-1/2 | 8 to 20 | 5/16- 4/5 |
| 100 | 4 | 8, 10, 12 | 5/16, 3/8, 1/2 |
EN24t Hexagon Bar Size Chart
| Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) | Size Chart in Milimeter | Weight Chart (Kilogram/meter) |
|---|---|---|---|---|---|
| 7 x 7 | 0.337 | 19 x 19 | 2.479 | 38 x 38 | 9.916 |
| 8 x 8 | 0.44 | 20 x 20 | 2.747 | 40 x 40 | 10.988 |
| 9 x 9 | 0.556 | 21 x 21 | 3.029 | 42 x 42 | 12.114 |
| 10 x 10 | 0.687 | 22 x 22 | 3.324 | 45 x 45 | 13.906 |
| 11 x 11 | 0.831 | 24 x 24 | 3.956 | 48 x 48 | 15.822 |
| 12 x 12 | 0.989 | 25 x 25 | 4.292 | 50 x 50 | 17.168 |
| 13 x 13 | 1.161 | 26 x 26 | 4.642 | 53 x 53 | 19.29 |
| 14 x 14 | 1.346 | 28 x 28 | 5.384 | 55 x 55 | 20.774 |
| 15 x 15 | 1.545 | 30 x 30 | 6.181 | 60 x 60 | 24.723 |
| 16 x 16 | 1.758 | 32 x 32 | 7.032 | 65 x 65 | 29.015 |
| 17 x 17 | 1.985 | 34 x 34 | 7.939 | 70 x 70 | 33.65 |
| 18 x 18 | 2.225 | 36 x 36 | 8.9 | 75 x 75 | 38.629 |
Looking for specific size in CArbon Steel EN24 Steel Bar? Check WNR 1.6582 Cold/ Hot Rolled Round Bar stock, Specification and Price in India.
EN24 Round Bar Price In India
| en24 round bar price in india | Price Per Unit (INR) |
|---|---|
| steel round bar en24 | US$ 400.00-US$ 900.00 / Metric Ton |
| High quality competitive price steel round bar en24 | US$ 500.00-US$ 700.00 / Ton |
| Structural Alloy Steel DIN1.6582 34CrNiMo6 Steel Round Bar | US$ 1,179.10-US$ 1,194.03 / Metric Ton |
| High strengthen alloy en24 round bar 230mm with stock | US$ 580.00-US$ 790.00 / Ton |
| steel round bar en24 | US$ 500.00-US$ 880.00 / Ton |
Sizing Table of EN24t Material Hollow Bar
| Size Table in MM | Chucked true to Outside Dia in MM | Chucked true to Inside Dia in MM and Inch | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Outside Dia, Milimeter |
Inside Dia, Milimeter |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches. |
Minimum. Inside Dia, Inches |
Maximum Outside Dia, Milimeter |
Minimum. Inside Dia, Milimeter |
Maximum Outside Dia, Inches |
Minimum. Inside Dia, Inches |
| 32 | 20 | 31 | 21.9 | 1.220 | 0.862 | 30 | 21 | 1.185 | 0.827 |
| 32 | 16 | 31 | 18 | 1.220 | 0.709 | 30 | 17 | 1.181 | 0.669 |
| 36 | 25 | 35 | 26.9 | 1.378 | 1.059 | 34.1 | 26 | 1.343 | 1.024 |
| 36 | 20 | 35 | 22 | 1.378 | 0.866 | 34 | 21 | 1.339 | 0.827 |
| 36 | 16 | 35 | 18.1 | 1.378 | 0.713 | 33.9 | 17 | 1.335 | 0.669 |
| 40 | 28 | 39 | 29.9 | 1.535 | 1.177 | 38.1 | 29 | 1.500 | 1.142 |
| 40 | 25 | 39 | 27 | 1.535 | 1.063 | 38 | 26 | 1.496 | 1.024 |
| 40 | 20 | 39 | 22.1 | 1.535 | 0.870 | 37.9 | 21 | 1.492 | 0.827 |
| 45 | 32 | 44 | 33.9 | 1.732 | 1.335 | 43.1 | 33 | 1.697 | 1.299 |
| 45 | 28 | 44 | 30 | 1.732 | 1.181 | 43 | 29 | 1.693 | 1.142 |
| 45 | 20 | 44 | 22.2 | 1.732 | 0.874 | 42.8 | 21 | 1.685 | 0.827 |
| 50 | 36 | 49 | 38 | 1.929 | 1.496 | 48 | 37 | 1.890 | 1.457 |
| 50 | 32 | 49 | 34.1 | 1.929 | 1.343 | 47.9 | 33 | 1.886 | 1.299 |
| 50 | 25 | 49 | 27.2 | 1.929 | 1.071 | 47.8 | 26 | 1.882 | 1.024 |
| 56 | 40 | 55 | 42 | 2.165 | 1.654 | 54 | 41 | 2.126 | 1.614 |
| 56 | 36 | 55 | 38.1 | 2.165 | 1.500 | 53.9 | 37 | 2.122 | 1.457 |
| 56 | 28 | 55 | 30.3 | 2.165 | 1.193 | 53.7 | 29 | 2.114 | 1.142 |
| 63 | 50 | 62 | 51.9 | 2.441 | 2.043 | 61.1 | 51 | 2.406 | 2.008 |
| 63 | 45 | 62 | 47 | 2.441 | 1.850 | 61 | 46 | 2.402 | 1.811 |
| 63 | 40 | 62 | 42.2 | 2.441 | 1.661 | 60.8 | 41 | 2.394 | 1.614 |
| 63 | 36 | 62 | 38.3 | 2.441 | 1.508 | 60.7 | 37 | 2.390 | 1.457 |
| 63 | 32 | 62 | 34.4 | 2.441 | 1.354 | 60.6 | 33 | 2.386 | 1.299 |
| 71 | 56 | 69.9 | 58 | 2.752 | 2.283 | 68.9 | 57 | 2.713 | 2.244 |
| 71 | 45 | 69.9 | 47.3 | 2.752 | 1.862 | 68.6 | 46 | 2.701 | 1.811 |
| 71 | 40 | 69.9 | 42.4 | 2.752 | 1.669 | 68.5 | 41 | 2.697 | 1.614 |
| 71 | 36 | 69.9 | 38.5 | 2.752 | 1.516 | 68.4 | 37 | 2.693 | 1.457 |
| 75 | 60 | 73.8 | 62 | 2.906 | 2.441 | 72.8 | 61 | 2.866 | 2.402 |
| 75 | 50 | 73.8 | 52.2 | 2.906 | 2.055 | 72.6 | 51 | 2.858 | 2.008 |
| 75 | 40 | 73.8 | 42.5 | 2.906 | 1.673 | 72.3 | 41 | 2.846 | 1.614 |
| 80 | 63 | 78.8 | 65 | 3.102 | 2.559 | 77.8 | 64 | 3.063 | 2.520 |
| 80 | 50 | 78.8 | 52.4 | 3.102 | 2.053 | 77.4 | 51 | 3.047 | 2.008 |
| 80 | 45 | 78.8 | 47.5 | 3.102 | 1.870 | 77.3 | 46 | 3.043 | 1.811 |
| 80 | 40 | 78.8 | 42.6 | 3.102 | 1.677 | 77.2 | 41 | 3.039 | 1.614 |
| 85 | 67 | 83.7 | 69.1 | 3.295 | 2.720 | 82.6 | 68 | 3.252 | 2.677 |
| 85 | 55 | 83.7 | 57.4 | 3.295 | 2.260 | 82.3 | 56.0 | 3.240 | 2.205 |
| 85 | 45 | 83.7 | 47.6 | 3.295 | 1.874 | 82.1 | 46.0 | 3.232 | 1.811 |
| 90 | 71 | 88.6 | 73.1 | 3.488 | 2.878 | 87.6 | 72.1 | 3.449 | 2.839 |
| 90 | 63 | 88.6 | 65.3 | 3.488 | 2.571 | 87.3 | 64.0 | 3.437 | 2.520 |
| 90 | 56 | 88.6 | 58.5 | 3.488 | 2.303 | 87.1 | 57.0 | 3.429 | 2.244 |
| 90 | 50 | 88.6 | 52.6 | 3.488 | 2.071 | 87.0 | 51.0 | 3.425 | 2.008 |
| 95 | 75 | 93.5 | 77.3 | 3.681 | 3.041 | 92.4 | 76.2 | 3.641 | 2.997 |
| 95 | 67 | 93.5 | 69.3 | 3.681 | 2.728 | 92.2 | 68.0 | 3.630 | 2.677 |
| 95 | 50 | 93.5 | 52.7 | 3.681 | 2.075 | 91.8 | 51.0 | 3.614 | 2.008 |
| 100 | 80 | 98.5 | 82.3 | 3.878 | 3.240 | 97.4 | 81.2 | 3.835 | 3.197 |
| 100 | 71 | 98.5 | 73.4 | 3.878 | 2.890 | 97.2 | 72.1 | 3.827 | 2.839 |
| 100 | 63 | 98.5 | 65.5 | 3.878 | 2.579 | 97.0 | 64.0 | 3.819 | 2.520 |
| 100 | 56 | 98.5 | 58.7 | 3.878 | 2.311 | 96.8 | 57.0 | 3.811 | 2.244 |
| 106 | 80 | 104.4 | 82.5 | 4.110 | 3.248 | 103.1 | 81.2 | 4.059 | 3.197 |
| 106 | 71 | 104.4 | 73.5 | 4.110 | 2.894 | 103.0 | 72.1 | 4.055 | 2.839 |
| 106 | 63 | 104.4 | 65.7 | 4.110 | 2.587 | 102.7 | 64.0 | 4.043 | 2.520 |
| 106 | 56 | 104.4 | 58.9 | 4.110 | 2.319 | 102.5 | 57.0 | 4.035 | 2.244 |
| 112 | 90 | 110.3 | 92.5 | 4.343 | 3.642 | 109.2 | 91.4 | 4.299 | 3.598 |
| 112 | 80 | 110.3 | 82.6 | 4.343 | 3.252 | 108.9 | 81.2 | 4.287 | 3.197 |
| 112 | 71 | 110.3 | 73.7 | 4.343 | 2.902 | 108.7 | 72.1 | 4.280 | 2.839 |
| 112 | 63 | 110.3 | 65.8 | 4.343 | 2.591 | 108.5 | 64.0 | 4.272 | 2.520 |
| 118 | 90 | 116.2 | 92.7 | 4.575 | 3.650 | 114.9 | 91.4 | 4.524 | 3.598 |
| 118 | 80 | 116.2 | 82.8 | 4.575 | 3.260 | 114.6 | 81.2 | 4.512 | 3.197 |
| 118 | 71 | 116.2 | 73.8 | 4.575 | 2.906 | 114.5 | 72.1 | 4.508 | 2.839 |
| 118 | 63 | 116.2 | 66.0 | 4.575 | 2.598 | 114.2 | 64.0 | 4.496 | 2.520 |
| 125 | 100 | 123.1 | 102.7 | 4.846 | 4.043 | 121.9 | 101.5 | 4.799 | 3.996 |
| 125 | 90 | 123.1 | 92.8 | 4.846 | 3.654 | 121.7 | 91.4 | 4.791 | 3.598 |
| 125 | 80 | 123.1 | 82.9 | 4.846 | 3.264 | 121.4 | 81.2 | 4.780 | 3.197 |
| 125 | 71 | 123.1 | 74.0 | 4.846 | 2.913 | 121.3 | 72.1 | 4.772 | 2.839 |
| 132 | 106 | 130.0 | 108.8 | 5.118 | 4.283 | 128.8 | 107.6 | 5.071 | 4.236 |
| 132 | 90 | 130.0 | 93.0 | 5.118 | 3.661 | 128.4 | 91.4 | 5.055 | 3.598 |
| 132 | 80 | 130.0 | 83.1 | 5.118 | 3.272 | 128.1 | 81.2 | 5.043 | 3.197 |
| 132 | 71 | 130.0 | 74.2 | 5.118 | 2.921 | 121.2 | 72.1 | 5.035 | 2.839 |
| 140 | 112 | 137.9 | 115 | 5.429 | 4.528 | 136.6 | 113.7 | 5.378 | 4.476 |
| 140 | 100 | 137.9 | 103.1 | 5.429 | 4.059 | 136.3 | 101.5 | 5.366 | 3.996 |
| 140 | 90 | 137.9 | 93.2 | 5.429 | 3.669 | 136.1 | 91.4 | 5.358 | 3.598 |
| 140 | 80 | 137.9 | 83.3 | 5.429 | 3.280 | 135.8 | 81.2 | 5.346 | 3.197 |
| 150 | 125 | 147.7 | 128.1 | 5.815 | 5.043 | 146.5 | 126.9 | 5.768 | 4.996 |
| 150 | 106 | 147.7 | 109.3 | 5.815 | 4.303 | 146 | 107.6 | 5.748 | 4.236 |
| 150 | 95 | 147.7 | 98.4 | 5.815 | 3.874 | 145.7 | 96.4 | 5.736 | 3.795 |
| 150 | 80 | 147.7 | 83.6 | 5.815 | 3.291 | 145.3 | 81.2 | 5.720 | 3.197 |
| 160 | 132 | 157.6 | 135.3 | 6.205 | 5.327 | 156.3 | 134 | 6.154 | 5.276 |
| 160 | 122 | 157.6 | 125.4 | 6.205 | 4.937 | 156 | 123.8 | 6.142 | 4.874 |
Din 1.6582 Rod Heat Treament
- Hardening: 830 to 860 °C (1525-1580 °F), oil quench,
- Tempering temperature: 550 to 660 °C (1020-1220 °F)
EN24 Material Properties Density
7840 kg/m3
Uns 817m40t EN24 Steel Rod Hardness
58-60 HRC
Technical Parameter of Afnor 35ncd6 EN24t Round Bar
- Forging: 1050-850 °C
- Rolling: 1180-850 °C
- Quenching: 830-860 °C
- Tempering: 540-680 °C
- Normalizing annealing: 850-880 °C
- Soft annealing: 680-720 °C
Aisi 4340 EN24t Rod Melting Point
1500°C
Condition of Wnr 1.6565 Cold Rolled Round Bar
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
EN24 Black Bar Surface Finish
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
34crnimo6 Polised Bars Volumetric Weight
| Volumetric Weights | ||
| Material +/- 0.5 Grams | Volumetric Weight | |
| EN24 (817M40) | 7.84 g/cc x (16.38706 x Volume) | |
EN24 Vs EN9 Round Bar
| Grade | Cr | C | Ni | Si | S | Mn | P | Mo |
| EN24 | .90 - 1.40 | .35 - .45 | 1.30 - 1.80 | .10 - .35 | .040 |
.45 - .70 | ..040 | .20 - .40 |
| EN – 9 | – | .50 – .60 | – | .05 – .35 | .040 MAX | .50 – .80 | .040 MAX | – |
Take the reference of our quality and timely delivery from our clients in following cities
| Alloy Steel 1.6582 34CrNiMo6 EN24 Round Bar | Finland, Malaysia, USA, Bangladesh |
| Hot Rolled Round Bar En24 | Italy, Iran, Chile, Singapore |
| Forged steel bars en24 | Egypt, Spain, UK, Mexico |
| 817M40 steel round bars | Ellington -United States, Poland, Canada, UK |
| en24 forged steel round bar | United Kingdom -UK, Europe, UAE, Malaysia |
| 140mm en24 ms steel round bar | Colombia, Malaysia, Sweden, China |
| en24 sae4340 40CrNiMo alloy steel round bars | Dubai, Netherlands, Russia, Malaysia |
| Length: 3-6 Meter 817M40 forged steel round bars | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
| en24 cold drawn steel bars | Philippines, Nigeria, Australia, UK |
| alloy steel EN24/42CrNiMo round bars 250mm | Oman, Malaysia, Hong Kong, UAE |
| alloy steel round bars/rod en24 | South Africa, Bahrain, Singapore |
| 817M40 Steel Round | France, Thailand, Europe, Qatar |
| 266mm en24 calibrated steel bars mild steel round bar | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
| Length: 3 meter Steel EN24 Black Round Bars for Construction, Size: 16 to 200 mm | Dammam -KSA, Indonesia, Belgium, Philippines. |
| Round Bright EN24 Steel, Single Piece Length: 3 meter | Canada, Singapore, Malaysia, Philippines |
| Rectangular En24 Alloy Steel Flat Bars | Japan, Europe, Romania, Malaysia |
| 10mm 15mm rods 817M40 | Germany, Czechia, Malaysia, Thailand |